The Latest: BMW Motorrad News

BMW to issue "rear wheel flange" recall on 43K bikes

Sunday, March 15, 2015   (5 Comments)
Posted by: Wes Fleming
Share |

*****UPDATE 26 MAR: The National Highway Transportation Safety Administration (NHTSA) released its official notice of recall related to this issue, specifying that the recall will start on 21 April 2015.*****

The notice is available here (PDF).

BMW Motorrad announced to its dealers on or about Tuesday, 10 March that over 43,000 R and K motorcycles manufactured between November 2003 and April 2011 would be subject to a safety recall related to cracks forming on the rear wheel flange.

 

An email from BMW credited "ongoing quality analyses" for discovering the problem, and blamed "excessive torque applied to the wheel bolts" for the cracks. The email goes on to say that uncracked flanges with properly torqued bolts are safe to ride until the recall service can be performed.  The recall service will involve the replacement of the flange with a "more robust part."  (Note that in the photo above, the crack is in the part of the flange to which the rear brake disc connects, not the part of the flange to which the rear wheel connects.)


 

This has been an issue batted about anecdotally for several years by BMW riders, and this reporter has personally replaced two of the original, aluminum flanges.  The first replacement was aluminum - identical to the OEM part - but the second was indeed a "more robust part" and made out of steel.  Due to the difference in thickness between the original aluminum and replacement steel flanges (see photo below), the new flange requires a spacer ring be affixed in addition to the flange.  The combined cost of the new parts (flange and spacer) is less than the original aluminum part.

 

  

According to information posted on the UK website VisorDown, this recall will affect 367,000 motorcycles worldwide, including 23,000 in the UK.

This reporter spoke with a BMW USA customer service representative on Monday, 16 March 2015. The customer service rep said that riders who have already updated their motorcycles to the "more robust part" can, once the recall is officially underway, file a claim for reimbursement through their dealer. 

BMW anticipates publishing a service bulletin to dealers and sending recall letters to owners of the affected motorcycles in April. Your dealer probably won't have more information than is contained in this article, so in the meantime, questions should be directed to BMW Customer Relations by phone (800.831.1117) or email (CustomerRelations@bmwusa.com).

Photos by or courtesy of Wes Fleming

Comments...

Kai Fusser says...
Posted Wednesday, May 06, 2015
i checked on my 2010 R1200GS and the flange is made of steel (it holds a magnet), does that mean that mean it's the more robust part?
Wes Fleming says...
Posted Wednesday, March 18, 2015
Thanks Dan - appreciate the link. I updated the story to include the total number of bikes worldwide affected by this recall.
Daniel Ouellette says...
Posted Tuesday, March 17, 2015
This recall is also for Canada. Here's the link to Tansport Canada on it: http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?mk=2341&md=R1200ST&fy=0&ty=9999&ft=&ls=0&sy=0&rn=2015101&cf=SearchResult&pg=0&lang=eng
Wes Fleming says...
Posted Monday, March 16, 2015
Rod - I can't speak 100% definitively to that, but as of right now the information I have only applies to the US. Having said that, knowing this affects over 43,000 bikes tells me that it may be a wider recall at some point. I will do my best to continue investigating and follow up on your question.
Rod Cameron says...
Posted Sunday, March 15, 2015
Is this a US only recall or will bikes/dealers in Canada be notified?

Membership Software Powered by YourMembership.com®  ::  Legal