The factory BMW crash bars for the Water-Cooled R1200GS Adventure lack critical rear bracing. This design leaves the motorcycle’s magnesium valve cover vulnerable to damage from contact with the ground.
In a recent test done by Cycle World the stock crash bar on the R 1200 GS Adventure flexed into the cylinder head and punched a hole in the valve cover, when the rider took a hard fall. (See Cycle World, January 2015).
Touratech has addressed this problem by engineering the Factory Crash Bar Reinforcement Kit for the Water-Cooled R1200GS Adventure. This is a simple fix that can eliminate a critical failure. These reinforcement bars brace the BMW factory crash bars directly to the water-boxer’s frame and they instantly increase the protection of the bike and give the rider peace of mind wherever their adventure takes them.
The Touratech Crash Bar Reinforcement Brace is made of strong, 25mm electro-polished stainless steel tubing and is a perfect match for the stock bars. Touratech has produced a video that shows how quick and easy installation is!
BMW Motorcycle Owners of America
640 S. Main St., Suite 201 Greenville SC 29601
Opinions and positions stated in materials/articles herein are those of the authors and not by the fact of publication necessarily those of BMW MOA; publication of advertising material is not an endorsement by BMW MOA of the advertised product or service. The material is presented as information for the reader. BMW MOA does not perform independent research on submitted articles or advertising.