Post A Picture of Your Thumper

**rmarkr** · 05-27-2010, 05:21 PM

Originally Posted by alfabc

Where did you get the braces from? I'd be interested in seeing a better picture, and knowing where to get them.

Cheers,

Bill

Bill
I cut them from a piece of alu flat bar - probably 1/2"x1/16", and drilled the hole in the perspex, mounted with a rubber grommet (to stop cracking). The other end is mounted to an indicator panel screw, with a spacer (nylon nut) to get out of the reccess.
The stock lower, center bolt mounts into the plastic housing and is not very firm, the braces stop it flexing there.
Mark

**LilThumper** · 06-03-2010, 03:45 AM

Five bucks for tape and a couple of hours and viola!

**Teepke** · 06-03-2010, 04:45 PM

Originally Posted by LilThumper

Five bucks for tape and a couple of hours and viola!

nicely done!!!

I'm so putting pinstripes on my F800... once I paint it black.

-tp

**alfabc** · 06-03-2010, 05:09 PM

Originally Posted by Teepke

nicely done!!!

I'm so putting pinstripes on my F800... once I paint it black.

-tp

Do you have to listen to the Rolling Stones as you paint it???

BC

**Teepke** · 06-03-2010, 05:13 PM

hehehe... I'm torn between doing it myself... and paying for it to be done professionally (the paint job that is). my CS was just rattle can blacked... that "fusion" stuff krylon makes.

for the pin striping I'm sure I can handle it w/some white/reflect tape in approximate (varying) widths. not sure what I'll listen to when I do that. maybe changes by Bowie?

-tp

**rmarkr** · 06-03-2010, 06:41 PM

Originally Posted by LilThumper

Five bucks for tape and a couple of hours and viola!

Nice job - looks great!

**marty2** · 07-10-2010, 08:58 PM

My 03

**BACKROAD.ADV** · 08-13-2010, 07:18 PM

test-pic dlt-report

**twofastdogs** · 08-15-2010, 06:26 AM

Coming down Tin Cup Pass in Colorado.
-K

**BACKROAD.ADV** · 08-18-2010, 10:17 PM

**F650624** · 09-13-2010, 12:31 AM

On the way home from Alaska I found the source of happiness for the world's beer lovers.

**haley** · 09-23-2010, 11:56 PM

First solo ride....1600 miles in 3 days

Up to open the cottage in Ontonagon, MI. A staff member at the Big Mac bridge rode my bike over. Second trip I rode...on the grate. Did not care much for the experience but worth it to ride the UP

**slimdog** · 09-24-2010, 12:07 PM

The Bridge is an experiance. But you are right - the UP is a great ride BTW - Happy Birthday!

**timpilcher** · 10-22-2010, 08:27 PM

Algonquin Provincial Park, Ontario. My trip around Lake Ontario in Summer 2009.

**johnmcdaniel** · 11-03-2010, 11:49 PM

Here is a shot of my ride at the Dallas National Cemetary....

Thread: Post A Picture of Your Thumper

Thread Tools

Display

My 2007 650gs

MY 2007 650gs

Heading East, Da UP...Lake Michigan.

My Little Thumper

Posting Permissions