Results 1 to 8 of 8

Thread: volkswagen conversion

  1. #1
    Registered User
    Join Date
    Feb 2006
    Posts
    3

    volkswagen conversion

    Hi. My first time here.I was wondering if anyone out there remembers when somebody was putting volkswagen motors in /2 bikes? I've acquired a Chang Jiang bike and sidecar with a blown motor. I have a R90 engine that I was thinking about using but then I got to thinking about an old conversion that i had seen , /2 drive train-volkswagen engine. Does anyone have any info on such a conversion that I maybe able to use on this Chang? Thank you.

  2. #2
    Cannonball Rider #52 darrylri's Avatar
    Join Date
    Oct 2003
    Location
    Surf City, USA (Santa Cruz, CA)
    Posts
    4,522
    George, there's a Yahoo Groups Slash2Conversion mailing list that covers this territory.
    --Darryl Richman, forum liaison
    http://darryl.crafty-fox.com

  3. #3
    dlearl476
    Guest
    There was a nice VW/2 at the Las Vegas Moto Auction this year. I don't think I got a pic, though. I was kind o' rushed.

  4. #4
    Registered User
    Join Date
    Feb 2006
    Posts
    3

    vw conversion

    Thanks Darryl ,for the info. I'll check it out. Thanks again.Geo.

  5. #5
    Registered User
    Join Date
    Feb 2006
    Posts
    3

    vw conversion

    Thanks David for the reply. I have a few photos of two real nice /2 bikes with vw motors from the Natl rally that was held at Madison Ind. back in I think 1989. I'll have to do some more research. Geo.

  6. #6
    rabid reader dbrick's Avatar
    Join Date
    Apr 2003
    Location
    Santa Cruz CA
    Posts
    1,744
    Duane Ausherman hangs around with the vintage folks, and he's had quite a bit of experience with these things: http://w6rec.com/duane/bmw/BMW-VW/
    David Brick
    Santa Cruz CA
    2007 R1200R

  7. #7
    Club President HankPfister's Avatar
    Join Date
    Mar 2003
    Location
    Blue Ridge Mountains, Virginia
    Posts
    324
    It'd prolly be easier to put the R90 in the Chang. Not that it is impossible to put the VW in, There was some kind of adaptor plate that adapted the VW engine to the /2 trany, and the frame had to be lengthened by about 3" as I recall. I've seen several Urals with Airhead engines adapted. You could probably find some info on that at some Ural sites.
    Hank Pfister
    Copper Hill, VA
    pfestus1@yahoo.com
    2007 R1200GS, 1973 R75/5/Dnepr, 1984 R100RS/Motovation.
    www.twinvalleyriders.com

  8. #8
    Jobless! Its OK! ooweel's Avatar
    Join Date
    Aug 2003
    Location
    ShoeMassVille
    Posts
    33

    VW powered BMW's

    I might be of help in this regard?
    Most VMW owners play on the Yahoo group site VWMOTORCYCLES. Butterfield, Brown, Webley / Vickers, Rosema and Hamm built are all talked about along with pics and discussion on build and repair. Along with VW bikes Bud Burkey plays on this site. His VW motorcycles are 500 HP bikes of top quality build. Come on over and check it out! Hope this helps!

    00weel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •