Results 1 to 4 of 4

Thread: Clearwater Krista lights and BMR under mirror light brackets

  1. #1
    Registered User
    Join Date
    Jan 2005
    Location
    Southern Appalachia
    Posts
    13

    Clearwater Krista lights and BMR under mirror light brackets

    Can anyone who is using this set up, tell me how much clearance there is between the light and the fairing of 08 RT.
    A measurement would be very helpful.

    TIA
    Last edited by mjac; 07-08-2014 at 06:36 PM.
    Mike
    433

  2. #2
    Mike LngRdr's Avatar
    Join Date
    Apr 2012
    Location
    Moore, Ok
    Posts
    208
    Half and inch on my 2012 RT. It had been down on the right side and bracket did not contact it. It is a challenge to remove the plastic with it in place but doable.
    IBA Number 49673
    Moore OK
    http://lngrdr.blogspot.com/

  3. #3
    Registered User
    Join Date
    Jan 2005
    Location
    Southern Appalachia
    Posts
    13
    My bad. I should have said this was for a 08 RT.
    Mike
    433

  4. #4
    drgnhtr
    Join Date
    Jun 2008
    Location
    Castro Valley Ca.
    Posts
    36

    Clearance

    About 3/4 of an inch between the screw holding the light and the fairing. I put an old sweat sock over the assembly when I'm removing the tupperware.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •