Clearwater Krista lights and BMR under mirror light brackets
Can anyone who is using this set up, tell me how much clearance there is between the light and the fairing of 08 RT.
A measurement would be very helpful.
Last edited by mjac; 07-08-2014 at 06:36 PM.
Half and inch on my 2012 RT. It had been down on the right side and bracket did not contact it. It is a challenge to remove the plastic with it in place but doable.
My bad. I should have said this was for a 08 RT.
About 3/4 of an inch between the screw holding the light and the fairing. I put an old sweat sock over the assembly when I'm removing the tupperware.