Results 1 to 2 of 2

Thread: Need to shorten GS shift lever

  1. #1
    Registered User
    Join Date
    Apr 2003
    Location
    Fairview, NC
    Posts
    2

    Need to shorten GS shift lever

    I just installed a Wunderlich engine guard and the aftermarket shift lever on my 02 GS is too long. I installed a Wunderlich peg lowering kit and the longer shift lever that came with it hits the guard. I had to cut out 1.25" of the main tube area. I need help in knowing if a butt weld will suffice for the repair, or will some kind of internal insert be needed? I'm assuming the lever is stainless. I have no knowledge on welding. I plan on taking it to a welder Monday.
    Thanks,
    Doug

  2. #2
    Registered User Bones's Avatar
    Join Date
    May 2003
    Location
    Newport News, Va.
    Posts
    48
    I would contact the aftermarket shift lever Manufacturer and tell them the problem. they probaly have a solution. Remember, the more stuff you add or change, the more problems.

    good Luck! Bones
    Life without Daring Adventure is not worth Living!

    BONES

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •