Results 1 to 4 of 4

Thread: 95 K75S ABS - Where does this part go?

  1. #1
    Registered User
    Join Date
    Jun 2009
    Location
    Rochester, MN
    Posts
    14

    Question 95 K75S ABS - Where does this part go?

    I am working on putting everything back together after a transmission spline lube and I happen to find this 1 inch by .75 inch rubber block on the floor. It has a channel in it as if it slides into some special place... I looked through my parts manual and can't seem to find it anywhere. photo 1 (4).jpg

  2. #2
    Benchwrenching PGlaves's Avatar
    Join Date
    Oct 2003
    Location
    "Big Bend" TX
    Posts
    8,683
    Memory is vague here but I clearly remember the part - just not exactly where it goes. But it slides into a somewhat triangular cutout in one of the housings before a second piece bolts up against that flat third side. I'm thinking bellhousing but am not positive.

    Lee to the white courtesy phone.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell
    http://www.bigbend.net/users/glaves

  3. #3
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    3,393
    That goes in a notch in the bellhousing just to the right of the upper left transmission mounting bolt (just below the starter).



    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

  4. #4
    Registered User
    Join Date
    Jun 2009
    Location
    Rochester, MN
    Posts
    14
    Thanks Gents!! For anyone else, you do have to move the starter out of the way. Seems weird to have a big hole in the transmission case...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •