Results 1 to 15 of 16

Thread: Exhaust removal required with oil cooler during oil change?

Hybrid View

  1. #1
    Luddite Looney wecm31's Avatar
    Join Date
    Jun 2009
    Location
    Eganville, Ontario
    Posts
    348

    Exhaust removal required with oil cooler during oil change?

    I am debating installing an oil cooler on my R80RT.

    However; I have helped change oil on a 84 R100RS and a 95 R100GSPD both with
    oil coolers and both times we had to remove exhaust pipes to get the filter out.

    Is that the reality of having an oil cooler? I like the idea of the cooler, just not keen
    on having to remove the exhaust every time I change the filter.
    Gerald P
    The last thing I want to be is just like everyone else...
    1985 R80RT
    1969 Sport Fury Convertible

  2. #2
    Registered User wvpc's Avatar
    Join Date
    Dec 2009
    Location
    Ypsilanti, Michigan
    Posts
    192

    It is the reality.

    Removing the exhaust to change the filter IS pretty much the reality. The oil cooler is an over engineered German PITA. That is why some people in the cooler climates remove the oil cooler.
    12 R1200 RT
    83 R100 RT

  3. #3
    Day Dreaming ... happy wanderer's Avatar
    Join Date
    Mar 2010
    Location
    Vancouver, B.C. Canada
    Posts
    1,966
    Huh? '82 R100RS with oil cooler and I don't remove the exhaust to get the filter out. It's fiddly as heck getting everything back in but not impossible. I do use a hinged filter of course.
    MJM - BeeCeeBeemers Motorcycle Club Vancouver B.C.
    '81 R80G/S, '82 R100RS, '00 R1100RT

  4. #4
    Registered User
    Join Date
    Jan 2011
    Location
    kentucky
    Posts
    133

    remove exhaust

    I have a 86 R80RT for me it is just easier to remove the exhaust,

  5. #5
    Registered User
    Join Date
    Aug 2007
    Location
    Somers, CT
    Posts
    94
    I look at it as forced maintanence. I re-apply anti-seize to the exhaust threads every time i change the oil so that when i really need to remove the exhaust nuts they are not frozen. Still a PITA.

    Jim

  6. #6
    Nutfarm
    Join Date
    Apr 2008
    Location
    Folsom CA.
    Posts
    295
    Install a oil temp gauge, it the oil temp doesn't go much above 230 for any length of time a cooler is not needed.

    I installed a oil temp gauge on a R75/6 oil temp would run around 190 to 210, perfect. The temp would go up in traffic but would go back down once moving. The coolers don't have a fan so setting in traffic with a cooler isn't going to do much good.

    But I would say the later lean running 1000cc bikes with a fairing may need a cooler. The only way to know for shure is with a temp gauge.

  7. #7
    Registered User
    Join Date
    Dec 2007
    Location
    Reno, NV
    Posts
    1,962
    It sounds like there is some other problem. The earlier bikes have that thermostat, which makes things tricky, but the GS shouldn't have that. Are you using the hinged filters?

  8. #8
    Registered User b25bsaboy's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB. Canada
    Posts
    423
    Quote Originally Posted by wvpc View Post
    Removing the exhaust to change the filter IS pretty much the reality. The oil cooler is an over engineered German PITA. That is why some people in the cooler climates remove the oil cooler.
    Totally agree with the comment in that here in Calgary, we may get hot temperatures 4 - 6 times a year, so I personally see no need even though I have an oil cooler ready to be fitted to the R75/6 that I am restoring. My thought process tells me not to bother.

    My question is if I decide not to reinstall, what is the process to retrofit internally for the oil filter and oil filter side base plate?
    Rick MacPherson
    Success is Not a Destination, But a Journey.
    Accredited Motorcycle Appraiser
    1968 BSA Starfire, 1976 BMW R75/6, 2009 R1200RT

  9. #9
    Administrator 20774's Avatar
    Join Date
    Sep 2005
    Location
    San Antonio, TX
    Posts
    13,185
    Snowbum discusses the differences in the internals...I believe you need a different internal center pipe and there are specific ways to extract that pipe and reinstall the new one.
    Kurt -- Forum Administrator ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  10. #10
    Registered User
    Join Date
    Nov 2011
    Posts
    80
    Quote Originally Posted by b25bsaboy View Post
    Totally agree with the comment in that here in Calgary, we may get hot temperatures 4 - 6 times a year, so I personally see no need even though I have an oil cooler ready to be fitted to the R75/6 that I am restoring. My thought process tells me not to bother.

    My question is if I decide not to reinstall, what is the process to retrofit internally for the oil filter and oil filter side base plate?
    The oil cooler set-up has a different outer filter tube than the R75/6 non-cooler set-up (that has an inner cover and bolt under the flat outer cover). To run a cooler on a R75/6 requires pulling the existing outer tube and replacing it with the 11 11 1 338 203 tube. Not easy to do with the motor in the frame. It is not clear to me what you are "retrofitting internally" but if you have already installed the outer tube in preparation for the cooler and have decided not to use the cooler, then you cannot use the prior inner cap, bolt, and flat lid. You would have to find a non-cooler sunken outer cover and use the proper o-rings and inner tube to go with it.

  11. #11
    Jammess jammess's Avatar
    Join Date
    Aug 2005
    Location
    Florence, OR.
    Posts
    639

    Suggestion

    Quote Originally Posted by wecm31 View Post
    I am debating installing an oil cooler on my R80RT.

    However; I have helped change oil on a 84 R100RS and a 95 R100GSPD both with
    oil coolers and both times we had to remove exhaust pipes to get the filter out.

    Is that the reality of having an oil cooler? I like the idea of the cooler, just not keen
    on having to remove the exhaust every time I change the filter.
    I replaced the allen head bolts (3) with 10mm hex head bolts and no more problems.
    Jammess

  12. #12
    Registered User lkchris's Avatar
    Join Date
    Mar 2003
    Location
    Albuquerque, NM
    Posts
    4,804
    R100 that came from factory with an oil cooler had a flattened section in the right exhaust header that facilitated removing the thermostat during an oil change. Not sure when this entered production, but it wasn't day one. The thermostat clearance is the problem, not getting the filter out. Hinged filters introduced to address that.

    Check if yours is flattened and if not might want to obtain one--headers are same on all models through '84 and then different but same all models after that. Clearance is improved on '85 on models.

    R100GS don't have thermostat so should be no problem.
    Kent Christensen
    21482
    '12 R1200RT, '02 R1100S, '84 R80G/S

  13. #13
    Registered User mysteriousfish's Avatar
    Join Date
    Feb 2011
    Location
    Portland, Oregon
    Posts
    100
    On my 1980 R100RT, I have to remove the header and the lower fairing piece to change the oil...pretty tight quarters. On my naked 91 R100, I can change the oil using a hinged filter with the header in place. For me, the PITA is using the special 23 mm bolt tool for the thermostat to refill the cooler once it all drains, following Snowbum's guidance. I understand that some folks don't bother with that step. Not sure how essential that step is, but have made it a part of my regular practice...
    michael
    __________
    1995 R100GS; 1980 R100RT

  14. #14
    Registered User
    Join Date
    Oct 2006
    Posts
    8
    When I owned an 82 R100RT I did the same as Jammess, replaced the allen bolts with hex head.
    I don't ever remember removing the exhaust pipe to change the oil filter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •