Results 1 to 15 of 16

Thread: Master Cylinder Rebuild Kit for 17mm

Hybrid View

  1. #1
    Registered User b25bsaboy's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB. Canada
    Posts
    423

    Master Cylinder Rebuild Kit for 17mm

    Happy New year! I trust all are staying warm, as I know the temperatures here in Western canada are brutal and eastern canada is getting hammered with snow and freezing rain. My heart goes out to all of you that are without electricity and heat.

    Making good headway in rebuilding the 76 R 75/6. I am doing a twin disc brake conversion on the front and the piston for the master cylinder needs new rubber seals. Did some checking at the various supplier sits and I can believe that one cannot just buy the seals as it seems that you can only buy a kit. Is that a correct statement.

    Here is one that I found:

    34311234927_1_B.jpg

    All I need is the circlip, and the seals as the piston is in good condition.

    Does anyone know where to go to retrieve these items without paying a Kings ransom?
    Rick MacPherson
    Success is Not a Destination, But a Journey.
    Accredited Motorcycle Appraiser
    1968 BSA Starfire, 1976 BMW R75/6, 2009 R1200RT

  2. #2
    Administrator 20774's Avatar
    Join Date
    Sep 2005
    Location
    San Antonio, TX
    Posts
    12,898
    Doesn't look like it...the BMW fiche don't show any of the parts inside the M/C listed separately.
    Kurt -- Forum Administrator ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  3. #3
    Registered User b25bsaboy's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB. Canada
    Posts
    423
    Quote Originally Posted by 20774 View Post
    Doesn't look like it...the BMW fiche don't show any of the parts inside the M/C listed separately.
    That's what I thought!
    Rick MacPherson
    Success is Not a Destination, But a Journey.
    Accredited Motorcycle Appraiser
    1968 BSA Starfire, 1976 BMW R75/6, 2009 R1200RT

  4. #4
    Registered User
    Join Date
    Feb 2012
    Posts
    135
    If you are going to the expense of a dual disk setup how about going to a 'bar mounted master cylinder? From what I have read and heard the remote under tank setup was less than satisfactory.
    Mark

    Current - 1974 TR5T : 1993 R100R : 1994 R100RT ~ Past - 11# 1970s BSA/Triumph Singles & Twins : 2# 1970s CZ 125s : 1# 1985 BMW R65 : 1# 1976 Moby X7

  5. #5
    Registered User b25bsaboy's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB. Canada
    Posts
    423
    Quote Originally Posted by R100RT_Mark View Post
    If you are going to the expense of a dual disk setup how about going to a 'bar mounted master cylinder? From what I have read and heard the remote under tank setup was less than satisfactory.
    Hi Mark,

    You make a good point about having the brake master cylinder being at the handle bar level rather than at underneath the fuel tank. Being a newby to the Beemers, I not sure where to begin as I will be greeting the that cross road real soon.

    Thank you for the feed back.
    Rick MacPherson
    Success is Not a Destination, But a Journey.
    Accredited Motorcycle Appraiser
    1968 BSA Starfire, 1976 BMW R75/6, 2009 R1200RT

  6. #6
    Monza Blue 1974 R90/6
    Join Date
    Dec 2006
    Location
    Delaware
    Posts
    427
    Rick, remember this thread where you were asking about the dual disks a couple of years ago?

    http://www.bmwmoa.org/forum/showthre...t-Up-To-R-75-6

    "mymindsok" later posted in some detail about the components needed for the handlebar mounted master cylinder. Should be easy to find with search on his posts.

    Also, some detailed discussion About the mod in the BMW forum on advrider.

    Finally, I think Max BMW will be able to tell you exactly the parts to order if you talk with the parts Dept.

    Barron

  7. #7
    Registered User
    Join Date
    Dec 2012
    Posts
    939
    Quote Originally Posted by R100RT_Mark View Post
    If you are going to the expense of a dual disk setup how about going to a 'bar mounted master cylinder? From what I have read and heard the remote under tank setup was less than satisfactory.
    I think the only real advantage would be the ease of checking the fluid level. Maybe parts might be more readily available.
    "The difference between death and taxes is that death doesn't change every time congress meets." - Will Rogers

  8. #8
    Registered User jad01's Avatar
    Join Date
    Dec 2006
    Location
    Houston, TX or Portland, OR
    Posts
    328
    For what it's worth from my experience, I think I prefer the under-tank MC as opposed to the bar-mounted version. I never liked having the reservoir full of brake fluid up high over the painted surfaces of the bike (on any of my bikes over the years). I don't find a perceptible difference in the braking performance of the two types. It is easier to monitor the fluid level in the bar-mounted one, but I don't think it's difficult to pull the tank to check the under tank model. Having just rebuilt both types in December (under-tank on my /7 and bar-mount on my RS), the under-tank one was somewhat easier to complete, although the parts were more expensive.

    I did the dual disc conversion on my /7 a few years ago. I really like the upgrade for riding two-up with my wife. In retrospect, I kind of wish I had gone ahead and converted to the Brembo caliper front end from an early eighties bike since I was already running cast wheels. I have found the performance of the Brembo calipers are a nice step up from the ATE's. None-the-less, it was a good improvement over the original single disc arrangement.

    Good luck!
    Jim
    '78 R80/7 and '84 R100RS (Blues Brothers), '86 K75C (Icy Hot)
    '90 and '93 Red Mazda Miatas ("Jelly Bean" and "Red Hot")
    '96 Giant Upland (big Kendas & freshly greased bearings!)

  9. #9
    Registered User b25bsaboy's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB. Canada
    Posts
    423
    Quote Originally Posted by jad01 View Post
    For what it's worth from my experience, I think I prefer the under-tank MC as opposed to the bar-mounted version. I never liked having the reservoir full of brake fluid up high over the painted surfaces of the bike (on any of my bikes over the years). I don't find a perceptible difference in the braking performance of the two types. It is easier to monitor the fluid level in the bar-mounted one, but I don't think it's difficult to pull the tank to check the under tank model. Having just rebuilt both types in December (under-tank on my /7 and bar-mount on my RS), the under-tank one was somewhat easier to complete, although the parts were more expensive.

    I did the dual disc conversion on my /7 a few years ago. I really like the upgrade for riding two-up with my wife. In retrospect, I kind of wish I had gone ahead and converted to the Brembo caliper front end from an early eighties bike since I was already running cast wheels. I have found the performance of the Brembo calipers are a nice step up from the ATE's. None-the-less, it was a good improvement over the original single disc arrangement.

    Good luck!
    Morning Jim,

    Appreciated your comments and I agree with going from a single disc brake to a double setup.

    One question came up from your comments: I have found the performance of the Brembo calipers are a nice step up from the ATE's. This I agree with, but because of the lower tubes being designed to accept the ATE calipers, would you have to change these out in order for the Brembo's to be able to attached? Similar to what came on say a later R100RT?
    Rick MacPherson
    Success is Not a Destination, But a Journey.
    Accredited Motorcycle Appraiser
    1968 BSA Starfire, 1976 BMW R75/6, 2009 R1200RT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •