Trust all is well with everyone and the crazy weather we are having is not causing to much of an issue.
Took the pistons that came out of my 76 R75/6 yesterday and have started to clean them. I was wondering is it advisable to reuse pistons, as I have done this in the past with no issues. As well the markings on the top of the piston doesn't tell me anything other than the direction they must be installed. Can anyone shed some light on what these markings mean. Would like to know if they are standard size yet or have they at some point in the engines life been bored and fitted with over sized pistons?
What they looked like when I removed from the con rod.
The side view after cleaning and a light polishing!
These are the marking I am not familiar with.