Results 1 to 3 of 3

Thread: R1200cl Fuel Tank

  1. #1
    Registered User
    Join Date
    Sep 2013
    Posts
    6

    R1200cl Fuel Tank

    Man I put this in the search and found out just about everything except what I needed. I need to get the old fuel out of my tank and since is has a pump inside I am not sure how it is done. Does anyone have a suggestion????

  2. #2
    Registered User dieselyoda's Avatar
    Join Date
    Mar 2013
    Location
    Winnipeg, MB, Canada
    Posts
    405

    I don't know for sure about your bike.

    I have an R1100RT and some buddies have similar including an R1150RT, RS, R etc. We like to empty the tanks for winter. Need the gas for our snow blowers.

    All I have been doing is taking the pressure hose off from the tank before the quick couplers, add a 1/4" hose connector and a length of hose long enough to reach a jerry-can, key on until pump cycles and the fuel pretty much runs empty in the tank.

    Caution though, pay attention to when the jerry-can gets full otherwise you make a big, dangerous mess.

    That's what I do and it works for me. I'm sure there are other suggestions. Some pretty smart solutions are shared here.
    1997 R1100RT (Restored Basket Case) , 1981 KZ 440 LTD (Restored Basket Case)
    1986 K75S(the beutch), 1993 K1100RS (blown engine), 1997 Chev Short Box (4x4 with an LT1)
    "Life isn't about how fast or how high, it's about how well you bounce."

  3. #3
    Registered User
    Join Date
    Sep 2013
    Posts
    6

    dieselyoda

    Hey thanks for the tip. I currently have the tank off the bike, I just put a new clutch on it and wanted to drain it since it sat so long. Maybe when I get it all back together I will do it that way.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •