Results 1 to 14 of 14

Thread: Replacing front shoes on a 1973 1/2 r75/5

Hybrid View

  1. #1
    Registered User
    Join Date
    Jul 2006
    Posts
    85

    Replacing front shoes on a 1973 1/2 r75/5

    Hi
    Have new shoes and springs to replace on my /5. Very grabby and will lock the front wheel when starting out. After riding the brake and drying out the shoes they still grab and make the front end dive. So my question is which spring goes where. They have a different amount of coils, i think 17 & 19.
    Thanks
    Brian
    9842

  2. #2
    Administrator 20774's Avatar
    Join Date
    Sep 2005
    Location
    San Antonio, TX
    Posts
    13,143
    I don't know offhand, but check the link in my signature line. Find Duane Ausherman's website link...he had a section on /5 brakes.
    Kurt -- Forum Administrator ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  3. #3
    Registered User lmo1131's Avatar
    Join Date
    Jan 2010
    Location
    Pismo Beach, CA
    Posts
    3,045


    The "front" is at the left side of this photo. The silver "disc" under the lower end of the black spring is the adjustment cam (ref.)

    Read this too-> http://www.bmwscotter.org/procedures/procedures.htm

    Here's how you get them on without tearing your hair out.



    The next question is, how "worn" were your old shoes? Did they wear evenly across the face? If they didn't they have "milled" the drum to a taper. New shoes will not match the taper and consequently will not press evenly across the drum. You can see the dark band at the bottom of these shoes and the matching polished surface on the drum. This I learned the hard way when I inadvertently installed my brake shoes on the wrong side.

    Attached Images Attached Images
    "It is what you discover, after you know it all, that counts." _ John Wooden

    Lew Morris
    1973 R75/5 - original owner

  4. #4
    Administrator 20774's Avatar
    Join Date
    Sep 2005
    Location
    San Antonio, TX
    Posts
    13,143
    It appears from Lew's photo (if I can count right) that the front spring has few coils than the rear spring.

    I keep forgetting about BMW Scotter's website...always has good details on it.
    Kurt -- Forum Administrator ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  5. #5
    Registered User lmo1131's Avatar
    Join Date
    Jan 2010
    Location
    Pismo Beach, CA
    Posts
    3,045
    It appears from Lew's photo (if I can count right) that the front spring has few coils than the rear spring.
    And they are of a heavier gauge; it's what allows the rear shoe to engage before the front shoe.
    "It is what you discover, after you know it all, that counts." _ John Wooden

    Lew Morris
    1973 R75/5 - original owner

  6. #6
    Administrator 20774's Avatar
    Join Date
    Sep 2005
    Location
    San Antonio, TX
    Posts
    13,143
    Trying not to sidetrack this...but it appears that there is an actuation arm (or cam) on both sides of the backing plate. I guess this is the twin leading shoe design. But I thought there was just the one lever through the plate to actuate the arm, which in turns pushes the end of one of the shoes into the rotation drum. How does the second arm get actuated to engage the other shoe? I'm not seeing it...

    Ooops...now I see it. There are two lever arms...doh!
    Kurt -- Forum Administrator ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  7. #7
    Registered User
    Join Date
    Feb 2009
    Location
    Chicago, IL
    Posts
    276
    Read this too-> http://www.bmwscotter.org/procedures/procedures.htm

    Excellent article. Thanks for posting.

  8. #8
    Registered User
    Join Date
    Sep 2003
    Location
    Virginia Beach
    Posts
    704
    I thought I needed shoes about 30 years ago, but, instead, I cleaned up the old shoes and linings - like you. The "new" shoes are still in my grab bag of extra parts.

  9. #9
    B Reams brook.reams's Avatar
    Join Date
    Jan 2007
    Location
    Arvada, Colorado
    Posts
    134
    Quote Originally Posted by lmo1131 View Post
    Read this too-> http://www.bmwscotter.org/procedures/procedures.htm

    Here's how you get them on without tearing your hair out.


    Folks,

    A couple things to note here.
    1. the www.bmwscotter.org link is not working for me.
    2. The "...how you get them on..." works fine for the REAR but is not possible for the FRONT. This is because the front shoes have a hole that goes on a shaft while the rear don't.

    Onward.

    Best.
    Brook Reams.
    ---------------------------------
    Brook Reams - Arvada, CO
    Various Two-wheeled Vices, All BMW
    2004 R1150-RS || 2002 F650-GS || 1975 R75/6 || 1973 R75/5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •