Results 1 to 14 of 14

Thread: K1300 Gt final drive leak

Hybrid View

  1. #1
    SANDFORD
    Guest

    K1300 Gt final drive leak

    Bought a 2010 K1300 Gt to replace my 09 lost in a fire. This was a consignment sale from a Michigan dealer, bike had 4500 miles at purchase now has 5300 miles. Seeing some oil spots on rear wheel and can detect some seepage at rear drive seal. My warranty is up in July. Although a minor leak now my thoughts are its only going to get worse. My 09 started leaking at 45000 miles. I hear horror stories on the repair outcomes hope I have better luck. Will keep you posted. One dealer told me the bike was not used enough causing possible seal issue. Sounds like BS.

  2. #2
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    Yeah, me too, make 'em fix it.
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  3. #3
    Registered User
    Join Date
    May 2008
    Posts
    49
    Please keep us posted.

  4. #4
    Registered User
    Join Date
    Apr 2006
    Location
    Nibley, UT USA
    Posts
    109
    First, get the drive properly service by draining the old oil while hot, then refill with the correct quantity of correct gear lube. The dealer may be willing to cut you a deal on doing this first as a diagnostic step. It's possible the drive has been over-filled, or filled with incorrect lube. Since this was a consignment sale the dealer is not directly responsible for the condition of the bike, but can help you out with the warranty service if the drive proves to have a problem.

    Best,

    GTRider
    DGerber
    1983 R80ST -- 1988 K100RS (r.i.p.) -- 1995 R1100RSL (gone, never forgotten) -- 2004 K1200GT w/Hannigan S/C -- 2010 K1300GT

  5. #5
    DrPaul DrPaul's Avatar
    Join Date
    Apr 2007
    Location
    Bartlesville, OK
    Posts
    362
    Drain FD and refill with 180 ml of BMW SAF-X. As I recall, the original 220 ml FD refill volume was associated with seal leakage.
    DrPaul - 2008 K1200GT
    2004 R1150RT - sold,1974 R90/6 - sold
    2002 R1150RT - sold,1987 K75S - sold

  6. #6
    jefferson
    Guest
    I had mine done last summer with 15K-16K kilometers on it. (~10,000 miles) It starts seeping as you describe. Because of the low volume it is best to have the seal replaced ASAP. The dealer in Calgary did it on warranty (Bought it there new so you'd expect that) but it only took a couple of hours and the bike now has an additional 9K kilometers since with no sign of failure. The horror stories of final drive failures is disturbing but I am hoping that this is a thing of the past with the addition of a drain plug on the drive suggesting that it being a sealed unit forever is not a good idea.

    Good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •