Hi group, I have a 1996 R1100rt with 102,000 km. Runs and handles great.
Yesterday while I was poking around the telelever arm greasing the front lower shock connection, I noticed that I had a little side to side play at the A- arm where it connects to the engine. (Approx. 1 mm) The front ball bearing is solid, I replaced it last year.
I don't feel anything negative on the road as related to noise or handling, going straight or in corners or over bumps but I suspect that there should not be any play in the system.
My local dealer has the parts but can't do the work for a month or so. my questions; is any play acceptable? does the arm have to be removed to remove the bearings? do the new bearings have to be pressed in?
Thank you