+ 1 for the Skene.
Installing the P3 lights on my wife's C650gt, had some problems, emailed back and forth with Jerry for a couple days, discussing problem. Two days later received a updated controller in the mail, solved the problem. Seems the scooter uses a different voltage system and previous controller would not work. Fantastic customer service
PS since then have done another scooter with updated controller no issues at all, photon blasters on scooters are a 30 min install
My GSA1200 see's a fair amount of off road and rough, so the P3s were recently just not working in programmed mode. Lights worked only in running light. Done this twice after off road excursions, reprogrammed it in 15 seconds and works fine. I'm not sure, but seems rough conditions of off road has turned my P3s program off in recent months. Love em and the reprogram(in seconds) has worked when I find the situation mentioned. I've been thinking relocating the box, cushion it more. Randy
You can use both the P3 or Hyperlites with the BMW Aux light because they mount in different places. Got that combo on both an RT and K-GT.....(Plus reflective film and added reflctors on the back of the side cases and topcases.
I use Photon Blaster and a pair of front mounted LEDs for conspicuity on both bikes.
Can't have too much visibility...
Has anyone fitted LED Strips to a BMW topcase and wired into the tail light / brake light? Who did you use and was wiring pretty straight forward?
It was very easy to install and has a plug so I can remove the top case very quickly.
1994 K75 My first bike.
I also have the Skene Design P3 lights for both brake and turn signal; picked them up at the Salem rally and installed them. Couldn't be happier with any light. These are shockingly bright and the flicker pattern is very hard to miss if you are driving behind the bike. Very cool
I bought and installed the BMW aux LED brake light in September, 2012. I was please with it until a couple of months ago I noticed it acting funny on a ride. The tail light would stay on for 20 sec after the ignition was turned off and 4 LEDs were burned out. Then, last week, I noticed the brake lights wouldn't activate. I contacted BMW Motorcycles of Milwaukee, where I bought it, and found it was out of warranty by 2 months. I give credit to Jason, the service manager. He pitched my case to BMW and they are covering the light under warranty. I'll give it another shot. If I get another failure I'll go wit Skene.