Results 1 to 2 of 2

Thread: Heated grip connector question

  1. #1
    Registered User
    Join Date
    Oct 2012
    Posts
    53

    Heated grip connector question

    I replaced a failed aftermarket heated grip switch with the OEM switch. The OEM switch came with a standard molded plastic female connector which I'm trying to connect to the old wiring which has no connector. The female connector internal pins are smaller than anything I can find at Radio Shack, does anyone have a source for molded plastic male connector or very small male pins I can solder onto the old wires for plugging into the female connector?Thanks for any advice.

  2. #2
    Registered User lkchris's Avatar
    Join Date
    Mar 2003
    Location
    Albuquerque, NM
    Posts
    4,804
    Unfortunate that this was moved from Airheads section which I'd assume is the bike. Anyway, look first through the BMW parts system.
    Kent Christensen
    21482
    '12 R1200RT, '02 R1100S, '84 R80G/S

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •