Results 1 to 2 of 2

Thread: Screw stuck in tank

  1. #1
    remy1150
    Guest

    Screw stuck in tank

    Hi all,was pulling fairing on my 2002 1150rs to install new battery
    one of the screws just turned was able to drill head off but screw
    stuck, seems to be a insert can you pull and install new one?


    thank you for any help
    Chris

  2. #2
    MOA #24991 Pauls1150's Avatar
    Join Date
    Apr 2008
    Location
    south of Los Angeles
    Posts
    1,480
    Wild guess: the right side, rear-most on the tank? You're not the first...

    The female threaded inserts are embedded in the plastic of the tank. The left-over piece of screw can be carefully easy-outed, but if you just "pull" it, the tank will likely be damaged. If you can actually get a grip on it, give it a try, turning and pulling Gently at the same time. If it spins, you may have to resort to EDM (electrical discharge machining, where the part is literally burned out by a controlled zap). I've never seen a successful replacement of the threaded insert, since the plastic is so soft and thin.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •