Results 1 to 4 of 4

Thread: 2000 R1100RT Front wheel removal

  1. #1
    kpflyingv
    Guest

    2000 R1100RT Front wheel removal

    I've been a BMW owner since 79 but this is my first R1100RT. I am trying to get the front wheel off to replace the tire. Here's my problem...the manual says and shows to remove the front Brembo calipers......easy enough except that they will not clear the wheel. I have tried to manipulate both the wheel and the calipers but the pad edges won't clear. Surely the pads don't need removed before wheel clearance is enough. Any tips are welcome. Thanks

  2. #2
    You stupid, fix it! r11rs94's Avatar
    Join Date
    Jan 2006
    Location
    Tiverton, RI
    Posts
    5,149
    Yes I remember the first time I did mine. Grab the top of the brembo's and pullout then up, they will slide right off. Good luck..
    The thing about traveling is, you never want it to end and you can't wait to get home.
    I answer to Roy, Chief, or Sarg.
    04 R-1150-RT current bike. 94 R-1100-RS74,383, Sold, 78 R-80/7, K.I.A by a D.U.I
    www.OceanStateBMWriders.com

  3. #3
    Registered User
    Join Date
    Apr 2006
    Location
    maine
    Posts
    190
    I "rock" the caliper slightly against the disk to push the caliper pads back toward the caliper. This then gives the caliper a little bit more wiggle room to remove. It is a snug fit but will come out.

    mark

  4. #4
    kpflyingv
    Guest
    Thanks everyone, it is tight but it is now done.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •