Results 1 to 10 of 10

Thread: Prospective C650GT buyer

  1. #1
    Registered User
    Join Date
    Mar 2013
    Location
    Elgin, IL. USA
    Posts
    19

    Prospective C650GT buyer

    Hello All. This is my first posting since discovering this site, and I joined the MOA even though I have yet to buy. I have signed up for riding classes in May, and want to buy a C650GT shortly after that. (I hope to sell my '77 Beetle first.) I have some reservations about the "Scooter" after reading about the stalling problems and the oil weeping gasket. Have any of you newer owners experienced these issues? When I do buy, I would like to get one of the more recently built bikes, and hopefully get one with no such problems. Am I able to tell the production date by the serial number? (As with VW and Porsche.) About a month ago I went into my local BMW motorcycle dealer and looked at the C650GT for the first time. I was very impressed, but since I was not ready to buy, I did not want to take a lot of the salesman's time. He indicated that they were not firm on the list price. Would any of you new buyers be good enough to tell me approximately how much off the list price I can expect? I have enjoyed reading all the posts and seeing the pictures of your new bikes. I hope to be posting my new bike's picture in June. Thank you for answering my questions if possible. Best regards, Illiya.

  2. #2
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    The month and year of production should be listed on the label that the vin is on, not sure where to find that on a C650. I am waiting to pick mine up this spring. Waiting for the weather to warm up. What state are you in, or not in the US?
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  3. #3
    Registered User
    Join Date
    Nov 2012
    Posts
    107
    On the stalling issue, I experienced this but after the dealer re-adapted the FI and idle stepper motor, it has not reoccurred. I also have the weeping chain case but this is really slight and I think likely just due to under tightening, and will have the dealer tighten it up it the next time it's in.

  4. #4
    Jeff Wilson life member
    Join Date
    Jun 2012
    Location
    Richmond Hill Ontario Canada
    Posts
    151
    Quote Originally Posted by JimInSF View Post
    On the stalling issue, I experienced this but after the dealer re-adapted the FI and idle stepper motor, it has not reoccurred. I also have the weeping chain case but this is really slight and I think likely just due to under tightening, and will have the dealer tighten it up it the next time it's in.
    I had my scooter in the shop last week and they replaced the gasket in the rear drive under warranty and will again if there is the same issue again
    Jeff
    A bad day on the C650 GT scooter is better than the best day at work

  5. #5
    Registered User
    Join Date
    Mar 2013
    Location
    Elgin, IL. USA
    Posts
    19
    Thank you all for your replies. I live in Elgin, IL.

  6. #6
    Cage Rattler wezul's Avatar
    Join Date
    Nov 2006
    Location
    Glen Ellyn, IL
    Posts
    3,524
    Well hey!
    I'm right over by 'dere.
    Glen Ellyn
    Lets see if I can post a pic of mine.
    Had a weep, it's a torque issue I was told, no gasket? No kidding!
    No stalling.
    I have several bikes and this is the easiest to ride two wheeled anything I've ever been on. (IMLE)


    DSCN0581-L.jpg

  7. #7
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    The germans have been gluing engines and stuff together for years!
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  8. #8
    Registered User
    Join Date
    Mar 2013
    Location
    Elgin, IL. USA
    Posts
    19

    Smile

    Thank you all for your replies. Wezul - your bike looks great. I tend to favor your silver color or the bronze metallic. Would you mind telling me where you purchased yours?

  9. #9
    Registered User
    Join Date
    Mar 2011
    Location
    socal
    Posts
    356
    Got my wife a red GT, lowered and narrowed seat, installed gel insert work done by Saddleman in California
    Unless you REALLY need the top case save your money makes the bike to long and bulky, several makers including Saddleman make soft top cases that snap on over rear seat
    Did a couple up grades including Skene design P3 lights and photon blasters for the front
    Installed a BMW/DIN plug on top of right cowl wired to battery with fuse, good for heated clothing and connecting charger/maintainer to bike
    Wunderlich side stand foot enlarger is another good to have item
    Still waiting for side protection skid plates. Four months so far

  10. #10
    Registered User
    Join Date
    Mar 2011
    Location
    socal
    Posts
    356
    Forgot
    Adding GPS/SAT radio this month, to work with her C3/BMW comm set
    Local dealer in long beach gave me about 500 off sticker, not a big margin item
    No issues with bike, you'll enjoy, rides and handles fantastic, and yes will do well over the century mark, does sound like a lawnmower when starting out haha

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •