Results 1 to 3 of 3

Thread: Shock Installation

  1. #1
    HOTTECH
    Join Date
    May 2008
    Location
    Concord,N.C.
    Posts
    56

    Shock Installation

    I bought a pair of stock shocks to replace my stocks off my 2004 R1150R. I know that ?├╗hlins USA has a damper control and rebound adjustments that need to be made after installion. Is ther any adjustments to my stock Skowas that need to be made or are they just a plug and play stock shock?

  2. #2
    MOA #24991 Pauls1150's Avatar
    Join Date
    Apr 2008
    Location
    south of Los Angeles
    Posts
    1,480
    Plug'n'Play...

    If there is a little screw adjustment on the side of the bottom eye, that's rebound damping, set it to LIGHTLY seated and then 1/4 to 1/2 turn out. "Out" is softer; more than 1/2 turn out makes no difference (out of range).

  3. #3
    Live the Dream JRD's Avatar
    Join Date
    Jul 2003
    Location
    SW Ohio
    Posts
    62
    Regarding the rear shock, the little r1150r owners manual says 1-2 turns out on the screw adjustment for solo riding and less for two-up.
    Joe DeLuca
    SW Ohio USA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •