02 1150rt stainless hardware kit

[huntrj]

I'm looking to replace the black Allen head screws with stainless that attach the plastic fairings ..
Ay idea where a kit could be purchased? Thanks

[PAS]

The black fairing screws on my 03 RT are stock and are stainless. Remove the coating and buff them.

[lgb]

Most shops have them.
Beware that the SS screws are NOT tappered like the OEM screws. This makes the initial threading and alignment of the screw moore difficult.
Good luck with'em.

http://www.ascycles.com/detail.aspx?ID=43466

[145159]

Like PAS said just buff your stock ones. I chucked mine in a drill and used 600 grit wet sandpaper and then some good polish. The stock ones are a lot better than the aftermarket because of the taper and you know your putting the right length where it belongs.

[huntrj]

Thanks all, the heads are shot from so many removals, I will check it out , thanks

[OLSENSAN]

I just spray painted mine with rustoleum glossy black and they look great 4 years later. Cost: $3.79, no shipping