Results 1 to 15 of 36

Thread: Too much Turbulence on my 88 RS windscreen

Hybrid View

  1. #1
    Registered User
    Join Date
    Feb 2013
    Location
    Berlin, VT
    Posts
    13

    Too much Turbulence on my 88 RS windscreen

    This is my first bm'r and It appears to have an aftermarket windscreen on it. This one is 10" above the dash panel if measured vertically. I'm 5'10" and I need to duck down 2" or nearly stand to find clean air. The howling is awful and unless you wear earplugs it doesnt encourage riding at all. There is a small window at the base which I assume is to reduce turbulence? Also, the PO has installed about 1.25" bar lifts but the bars are not pulled back at all. Would the original screen work better?? Thx, Love the sight and tips
    Attached Images Attached Images

  2. #2
    Administrator 20774's Avatar
    Join Date
    Sep 2005
    Location
    San Antonio, TX
    Posts
    12,872
    You've discovered an issue that affects a lot of people for various reasons. Clearly there is a zone where the air is hitting your helmet and causing the noise. Likely the lack of smoothness on your helmet also contributes to the noise.

    I don't ride an RS, but you might need to look into a laminar lip replacement screen...I believe it directs the air slighly higher. I also seem to recall that even a slight bit of edging along the screen will break up the air somewhat. You might experiment with some simply clear tygon tubing split lengthwise and then slipped over the edge. Don't do anything permanent like gluing, but see if something might help the situation. Note that the original RS screen had an edge strip already built in.
    Kurt -- Forum Administrator ---> Resources and Links Thread <---
    '78 R100/7 & '69 R69S & '52 R25/2
    mine-ineye-deatheah-pielayah-jooa-kalayus. oolah-minane-hay-meeriah-kal-oyus-algay-a-thaykin', buddy!

  3. #3
    Minnesota Nice! braddog's Avatar
    Join Date
    Jun 2003
    Location
    Twin Cities - MN
    Posts
    1,915
    To answer your question, yes, the original screen would likely work better since it's a little shorter and shaped differently. The wind would hit you at a different spot.

    In my opinion, for your bike, you'll either want to go shorter to lower the wind blast below your helmet and face, or taller, so that it goes over you, since it seems the current shield is creating undesirable turbulence.

    I've replaced my shields on my RS fairings from Parabellum, so there are options out there for aftermarket shields for the old RS's.
    -----------------------------------------
    Brad D. - Member #105766
    '77 R100RS - Black Beauty (big pipe, baby!)
    '94 R1100RS - Sylvia

  4. #4
    Registered User
    Join Date
    Jun 2003
    Location
    Northern Front Range, CO
    Posts
    6,415
    regardless of what you decide to do with a windshield, earplugs are a good idea. as hearing damage is permanent & unrecoverable.
    Ride Safe, Ride Lots

  5. #5
    Sir Darby Darryl Cainey's Avatar
    Join Date
    Mar 2003
    Location
    Fenwick, Ontario Canada
    Posts
    2,142
    I bought a windshield from Motobinns Seducum 4" over stock height.

    Works well for me + earplugs!
    Attached Images Attached Images
    Ambassador BMW MOA Ontario Canada
    President Niagara BMW Riders #298
    Knights of the Roundel #333
    1977 R100RS, (Retired) 1993 R100GS (just getting started)

  6. #6
    Registered User
    Join Date
    Dec 2007
    Posts
    13

    Ear plugs or trade for an RT

    I bought my '93 RS from my brother several years ago. It was my first motorcycle with a fairing. On the ride home I had buyer's remorse -- the noise was deafening. I had never experienced anything like it on any of the standard (no fairing) bikes I'd owned. He had always told me how smooth and quiet the bike was -- "like a Cadillac." When I called him to complain he said, "You're wearing ear plugs, right?" Well, no, I wasn't. He had always worn ear plugs on all of his bikes and tried to talk me into them over the years. I'd tried them, but the weirdness of having something stuck in my ears far outweighed any noise reduction that I experienced. Not on the RS -- it is essential to wear ear plugs to enjoy the bike.

    And about aftermarket windscreens -- I'm sorry, but in my opinion they ruin the looks of the RS and probably (no first-hand experience) don't cut the noise as well as ear plugs.

    So in my obviously biased opinion, use the stock windshield for beauty and use ear plugs for noise reduction -- or trade for an RT.

  7. #7
    Atomic City Boxer 154048's Avatar
    Join Date
    Nov 2009
    Location
    Santa Fe, NM
    Posts
    352
    I ended up cutting my stock RT fairing down by about 9 inches.
    Got rid of the buffeting, but I still wear the plugs.
    Steve in Santa Fe
    1980 R100RT
    2005 DR 650

  8. #8
    Registered User
    Join Date
    May 2008
    Location
    B.P., MN
    Posts
    709
    Had an '84 RS, wasn't crazy about the fairing. Created a beautiful pocket with downforce at speed. Personally it wasn't for me. Riding in a pocket that is. Always wear ear plugs after going temporarily deaf many years back, without plugs, thinking a new Arai was the ticket, and a long all day ride into a headwind. IMO earplugs are part of ATGATT. Give the stock shield a try, it may surprise.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •