I'm getting ready to install the Skene P3-TS lights and looking at available options to run the wires from the led lights to the controller. Also, I'm going to get power from the front parking light wire at the headlight connector so I want to sleeve that wire as well. I'd like to run the wires in some sort of protective sleeves to eliminate potential rubbing etc. A Google search yielded a ton of different materials and types of sleeves. The wires from the leds are very thin so I'm looking for something with a very small diameter. I'd appreciate hearing from anyone with experience and/or suggestions on what to use and perhaps where to get the best suited sleeves.