I am installing Wunderlich crash bars on my 97 R1100RT and ran into a problem where the instructions don't match the bike. I am curious if anyone has had a similar issue. Specifically the crash bar bracket bolts onto a tab just behind the center stand with a counter sunk bolt. The instructions show a single tab but on my bike there are two tabs about 1-1/4" apart. One is attached to the catalytic converter and there is a rubber bushing between the brackets which I believe are vibration dampeners. It looks like I will have to create my own modification with a longer bolt, rubber washers, and a spacer to make it work. Just don't want to screw something that I am not seeing the potential problem now.