Results 1 to 2 of 2

Thread: How to demount/mount tires on rims with pressure sensor?

  1. #1
    Registered User kdeline's Avatar
    Join Date
    Apr 2003
    Location
    Gurnee IL
    Posts
    10

    How to demount/mount tires on rims with pressure sensor?

    Were do you start to demount on the rim equipped with a pressure sensor? Where to you start to mount? What to watch for? Also I use two ways to do this depending on the location I am changing the tire. On the ground with tire irons or with a cheap Harbor Freight tire changer. Any different method between the two?

  2. #2
    Registered User mneblett's Avatar
    Join Date
    Nov 2005
    Location
    Fairfax, VA
    Posts
    1,729
    I put the sensor at ~4-5 (as you face the changer), start the tire over the rim at 8-9, the tire is off by the time the bar gets to 2-3. Pretty easy to avoid running the bar over the sensor package. Also easy to avoid putting the tire in the drop enter directly over the sensor.
    Mark Neblett
    Fairfax, VA
    #32806

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •