Windshield recommendations for K75 Standard 1994

[Justdirt]

I would appreciate any information regarding a windshield for a 1994 K75 Standard. This will be my first K75. I also will need to change from the standard seat to a low seat. Thank you for your time and assistance.

[Lee]

Welcome to the site.

We were happy with the standard BMW shield on our 1987 K75Ts.
I'm not sure if this shield is still available from BMW.

[Justdirt]

Thanks for the information and the great photo.

[ARGENT BRICK]

I do not think that the stock unit is still available. You might be able to find a used one at beemer bone yard or another cycle salvage.
Also, I think National Cycle still makes a windshield.

Just for fun, how about a picture of your bike?

[ken e]

The Parabellum Scout worked very well for me.
Screen purchased was too tall, cut it down a bit so that I was looking over the top a few inches.

[Justdirt]

Ken E. that is one good looking motorcycle. Thanks for posting the photo.
Agent Brick, I went to the National Cycle web site. Thanks for the input. They have a Plexistar2 for the K75. I will give National Cycle a call when they reopen after the New Year holiday. Happy New Year to all.

[BBKME]

Hello. The BMW shield is still available but it might be difficult to find a brand new one. I found a new old stock one at Resycle BMW in Columbus, Ohio last spring. As Argent Brick mentioned you'll see some used ones for sale sometimes as well. In fact, I recall one for sale very recently on Ebay. That shield also fits some of the R100's so you may find one via that search. Good luck!

[rut3556]

>>We were happy with the standard BMW shield on our 1987 K75Ts.<<

I have the stock BMW shield on my '92 K75 as well, but will be adding a Laminar Lip just for the heck of it.

[BBKME]

Adding the Laminar Lip does change the flow quite a bit. I like the stock shield much better with the lip.

[ARGENT BRICK]

FWIW, I am very happy with my OEM windshield. It has a good, solid mounting system. If the price is about the same as the National brand, then get the stock BMW windshield.

[ghyber]

I tried an AeroScreen K75S clear shield and went back to the OEM.

[bmwrn]

The stock shield with a lip is thebee's knees which I've used for 14 years and really like.I put a parrabellum scout on last year anr\d so far I like that just fine too. I don't think you can go wrong with either one.

[rut3556]

I'm glad to hear that, as I bought the "lip" and am awaiting the coming of spring so I can install it.

[Justdirt]

I would like to thank everyone who responded to the thread. I ordered and installed a Plexistar 2 clear shield from National Cycle.

[ARGENT BRICK]

Mickey1,

Nice to hear that you found something that will meet your needs. How are things going in your search for a low seat?