turn signal relays.
So, I'm hunting a replacement turn signal relay for my 1977 r75/7. Now, I've found some that are 'official BMW' for about 100 bucks.
which in my mind is 20 buck for the relay, and 80 bucks for the BMW logo.
anyone know of a cheaper way to do this?
I used a Tridon relay I got at autozone for 10 bucks. Do a search on here and you'll find instructions. Was very easy and very cheap.
There are a couple of options:
1. order another relay from Motobins (for about 1/2 the cost, with a 2 week wait): http://www.motobins.co.uk/displayfin...?q=74620&go=GO
2. get some 1/4" spade connectors, wire, and crimping tool to make some jumpers to use a Tridon EL13 or HD13 flasher relay - some of the details are here: http://www.bmwmoa.org/forum/showthre...ignal-question
The replacement EL13 model has only three leads (no ground) and should be zip-tied or otherwise secured in the spot for the flasher relay. Snowbum's site also talks about using a Tridon EL13 (or HD13) flasher relay: http://bmwmotorcycletech.info/electricalhints.htm
The tridon website in Australia has some wiring diagram information for the HD13 (which has the same connections as the EL13) flasher: http://www.tridon.com.au/Products/Pr...G=478&P=104171