Results 1 to 15 of 15

Thread: Heated Grip--left side fail

Threaded View

  1. #1
    Registered User mgordon's Avatar
    Join Date
    Jul 2006
    Location
    Vancouver, BC
    Posts
    185

    Heated Grip--left side fail

    Hey all, my 98 R1100r left side heated grip has failed. I've got proper voltages at the rocker switch (hi-11.5v/low 9.5v) and at the wires to the element in the grip. Since buying this bike from the PO, I've had to clean/lubricate the switch internally, and only just realized that it was 3-way, as it was physically stuck from corrosion.

    I've also tested for continuity between the leads at the grip, which was good.

    So if I've got voltage and continuity through the circuit, where is the failure? I guess the one last thing to do is check the connection at the main wiring harness under the tank, correct?

    Thanks!
    Last edited by mgordon; 12-10-2012 at 06:23 PM.
    1998 R1100R
    Vancouver, BC
    BMW MOA #97970

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •