Results 1 to 6 of 6

Thread: 1150 GS, front signal don't work after "Get Off"

  1. #1
    Registered User
    Join Date
    Sep 2008
    Location
    Central Ky.
    Posts
    2

    Unhappy 1150 GS, front signal don't work after "Get Off"

    I have an 03 Gs 1150. The front signal lights fail to work after crash. The rear signals flash but very quickly.Any ideas would be greatly appreciated.
    Last edited by tinmender; 12-05-2012 at 08:24 PM. Reason: Omitted word

  2. #2
    Registered User
    Join Date
    Jun 2003
    Location
    Northern Front Range, CO
    Posts
    6,407
    broken bulb(s).

    the decreased resistance to the circuit is what is causing the fast flash rate.
    Ride Safe, Ride Lots

  3. #3
    Registered User
    Join Date
    Sep 2008
    Location
    Central Ky.
    Posts
    2
    I've tested the bulbs and they are good. I'm thinking maybe a connection under the tank?

  4. #4
    Registered User
    Join Date
    Aug 2005
    Location
    Somers, NY
    Posts
    537

    Did the wires that run through

    the turn signals get stripped away from their connections?
    Somers, NY

    Just enjoying the ride.......

  5. #5
    Registered User
    Join Date
    Jun 2003
    Location
    Northern Front Range, CO
    Posts
    6,407
    that would be a next option. have you checked for current at the bulb sockets?
    Ride Safe, Ride Lots

  6. #6
    Registered User
    Join Date
    May 2007
    Posts
    4
    Fast flash indicates that the flasher does not sense the load of your front signals. Ergo: connection is broken somewhere.

    It could be the push-on connectors behind lamp socket inside of the turn signal stalk. Just get a voltmeter, open the turn signal and start chasing down the bad connection. Very simple.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •