1150 GS, front signal don't work after "Get Off"

[tinmender]

I have an 03 Gs 1150. The front signal lights fail to work after crash. The rear signals flash but very quickly.Any ideas would be greatly appreciated.

[bikerfish1100]

broken bulb(s).

the decreased resistance to the circuit is what is causing the fast flash rate.

[tinmender]

I've tested the bulbs and they are good. I'm thinking maybe a connection under the tank?

[sdpc2]

the turn signals get stripped away from their connections?

[bikerfish1100]

that would be a next option. have you checked for current at the bulb sockets?

[rdwalker]

Fast flash indicates that the flasher does not sense the load of your front signals. Ergo: connection is broken somewhere.

It could be the push-on connectors behind lamp socket inside of the turn signal stalk. Just get a voltmeter, open the turn signal and start chasing down the bad connection. Very simple.