Results 1 to 8 of 8

Thread: Windscreen stuck intermittently? 2012-R1200RT

  1. #1
    Registered User Gadgetech's Avatar
    Join Date
    Aug 2012
    Location
    Greenville, SC
    Posts
    118

    Windscreen stuck intermittently? 2012-R1200RT

    This is the second time in probably a month and a half that I've gotten on my bike and went to adjust the windscreen up and it wouldn't budge. There haven't been any indications that something is broken and the screen has worked previously in the day before not working. Both times the windscreen has been in the full down position.

    The first time it happened I was riding along, adjusted my screen down and then maybe 5 minutes later tried to adjust it up and it wouldn't move. About 10 minutes after that it worked fine and has up until 30 minutes ago.

    This time, I adjusted it down and parked it shortly there after for about 30 minutes. I got back on the bike and the screen wouldn't budge for my whole ride back to work which was about 20 minutes.

    Has anyone had these issues or are you able to suggest what might be the issue. I'm sure if I take to the dealer, it'll work by the time they get to look at it.

  2. #2
    Registered User mneblett's Avatar
    Join Date
    Nov 2005
    Location
    Fairfax, VA
    Posts
    1,729
    Quote Originally Posted by Gadgetech View Post
    Has anyone had these issues
    Yes.

    Quote Originally Posted by Gadgetech View Post
    or are you able to suggest what might be the issue.
    Dead/dying left grip cluster switch. BMW is *still* having problems with the new design switch clusters. Warranty replacement.
    Mark Neblett
    Fairfax, VA
    #32806

  3. #3
    Registered User Gadgetech's Avatar
    Join Date
    Aug 2012
    Location
    Greenville, SC
    Posts
    118
    Nice, thank you for the info.

  4. #4
    Registered User mneblett's Avatar
    Join Date
    Nov 2005
    Location
    Fairfax, VA
    Posts
    1,729
    No problem. The second owner of my K16GTL has experienced the same windshield problem, and my '12 R12RT had its right switch cluster replaced for a defective starter switch.
    Mark Neblett
    Fairfax, VA
    #32806

  5. #5
    Registered User
    Join Date
    Sep 2008
    Location
    Wilmington, NC
    Posts
    1,561
    The older switches had their issues, too, but the ones on my 08 RT and 06 K GT have been fine. The new switch design was supposed to be an improvement but seems more like just another bit of cost cutting for manufacture- there are quite a few reports of failures of what ought to be an easy 100% reliable part..

    Just get it on record and get your dealer to replace it eventually- covered by warranty.

  6. #6
    Registered User Gadgetech's Avatar
    Join Date
    Aug 2012
    Location
    Greenville, SC
    Posts
    118
    It still isn't working. My hope is that'll be the case in the morning when I take to the dealer. Any bets?

  7. #7
    Registered User Gadgetech's Avatar
    Join Date
    Aug 2012
    Location
    Greenville, SC
    Posts
    118
    And of course it works just fine this morning.

  8. #8
    Registered User Gadgetech's Avatar
    Join Date
    Aug 2012
    Location
    Greenville, SC
    Posts
    118
    Fortunately they were able to duplicate the issue and are ordering a new switch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •