K13GT 18K service list

[damiangs]

Does anybody have/know the 18K service work sheet for the K 1300 GT?

I'll really appreciate it if you can share it.

Safe riding

Damian

[henzilla]

From A&S's website...there are a few listed...

http://www.ascycles.com/pdf/ServiceS...K1300GT_6K.pdf

http://www.ascycles.com/pdf/ServiceS...0GT_Annual.pdf

[damiangs]

Thank you for the link.
I don't see how often the valves have to be checked/adjusted.
Is this the 18000 miles list or 6-12k?

Thank you for your help

[henzilla]

I linked the annual/12K and the 6K intervals I believe...at 18K, it should only be oil& filter off the top of my head. every 6K oil change so an 18 is between majors

here is the one with valve check listed...

http://www.ascycles.com/pdf/ServiceS...12K_Annual.pdf

24K valve check is what was typical on the K12's I wonder if it's higher now?...I have checked four in that zone and one at 36K with no out of tolerance found.
And it's no picnic getting to that area...the first time can scare you!

You'll need a vacuum set up to refill the coolant safely w/out air in the system.

There is a post here with a how to...and more info over in the K bike forum. If you have not visited there, just take some of the postings of gloom and doom in stride...some are true...some are a little dramatic It's more International and chatty!

http://www.k-bikes.com/forums/cmps_index.php?

[damiangs]

Thank you Steve,

It sounds good and easy this time at 18K.
(When the time comes I will take the GT to a BMW mechanic to check and adjust the valves if needed)

I really appreciate your help

Safe riding

Damian

[GTRider]

First valve check is at the 18k service, and along with it the first sparkplug change-- as per the sheet referenced above at the A&S site. BMW calls for checking valve clearance every 30000 kilometers (18k miles). Beyond that, the 18k service adds the normal 6k stuff-- oil, filters, etc.

I wouldn't put off that 18k service much over 18.5k if it were my bike. While you're having the 18k done you might also want to see about the cam chain jump guard, which is now a recall in the UK but not here in the US. Also, be sure to ask for some kind of documentation on what the valve clearances actually measured at so you can track change over time/miles. I'm hoping the wedge Ks run like the brick Ks, where after the first 36k valve checks were really only needed every 24-36k or so.

Best,

GTRider