Results 1 to 11 of 11

Thread: Front Wheel Bearing

Hybrid View

  1. #1
    Fire Don't Burn Motor unit 7's Avatar
    Join Date
    Nov 2006
    Location
    Leamington, Ontario, Canada
    Posts
    32

    Exclamation Front Wheel Bearing

    Has anyone replaced the bearings in a 2004 Rt I have a front wheel vibration and ordered the bearings, but it look like there is some extra tools needed to remove the one bearing.

    Is there an alternate way of removal them I can do to get the old ones out, as they are not the same size and different form the standard removal of wheel bearings according to the BMW manual except for the heat.

  2. #2
    Registered User
    Join Date
    Sep 2008
    Location
    Planet Earth
    Posts
    267
    The factory manual is here somewhere to download. Explains it well. Maybe someone can provide the link.

  3. #3
    Registered User Olsensan's Avatar
    Join Date
    May 2008
    Location
    Adirondaks and LI,NY
    Posts
    461
    I don't know what the clymers or Hayes manual says about how to do this but it seem pretty straight forward


    36 31 396 Removing and installing
    wheel bearings
    36 31 Removing wheel bearings
    • Carefully lever out the shaft sealing ring with a
    screwdriver.
    • Remove driver and retaining ring.
    • Clamp a drift, BMW No. 36 5 511, into the vise and
    place the wheel on it with the wide bearing down.
    • Place a spacing ring, BMW No. 36 6 640, between
    the wheel hub at the right and the claws of
    the internal puller.
    • Heat the bearing seat to approx. 60 ??C (140 ??F).
    • Pull out the wheel bearing with countersupport
    22/1, BMWNo. 00 8 572, and internal
    puller 21/3, BMWNo. 00 8 574.
    • Remove wheel from drift, BMW No. 36 5 511.
    • Press out spacing bushing (1) and wheel
    bearing (2) with drift, BMWNo. 36 5 530.
    R28360030
    R28360020

    36.8
    36 31 Installing wheel bearings
    • Degrease bearing seats.
    • Heat the bearing seat to approx. 60 ??C (140 ??F).
    • First insert wide bearing using drift,
    BMW No. 36 5 512 , and handle,
    BMW No. 00 5 500.
    • Clamp a drift, BMWNo. 36 5 511, into the vise
    and place the wheel on it with the wide
    bearing (1) down.
    • Install spacer tube (2).
    • Bearing seat temperature 60 ??C (140 ??C).
    • Insert narrow bearing (3) with drift,
    BMW No. 36 5 512, and handle,
    BMW No. 00 5 500.
    • Install circlip with convex side facing down.
    • Install driver.
    • Drive in shaft sealing ring with drift,
    BMW No. 36 5 500, and handle,
    BMW No. 00 5 500.

  4. #4
    Fire Don't Burn Motor unit 7's Avatar
    Join Date
    Nov 2006
    Location
    Leamington, Ontario, Canada
    Posts
    32

    Wheel Bearings

    Thank you I do have the BMW Manual but do not have the special tools and I don't think many do especially the internal puller and drift the special BMW tools.

    Was wondering it other tools would do and how?

    But thanks for the info so far!

  5. #5
    Registered User
    Join Date
    Jun 2003
    Location
    Northern Front Range, CO
    Posts
    6,407
    Just curious- have you already checked for play in the bearings, or did you (or someone else) just assume that the vibration is a bearing issue?
    Ride Safe, Ride Lots

  6. #6
    Fire Don't Burn Motor unit 7's Avatar
    Join Date
    Nov 2006
    Location
    Leamington, Ontario, Canada
    Posts
    32

    wheel bearing

    Yes I did! also have Micro beads in the tire the vibration is not bad but there and a defined bad spot as you move the wheel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •