Page 1 of 2 1 2 LastLast
Results 1 to 15 of 25

Thread: 1990 K75S - bent bike - need some parts :(

  1. #1
    Registered User jwetering's Avatar
    Join Date
    Aug 2011
    Location
    north vancouver
    Posts
    156

    1990 K75S - bent bike - need some parts :(

    Yep, riding home today in traffic, I was looking everywhere but where I should have been and ran into the back of a Honda Civic.

    Second gear - maybe 20 mph? Over the handlebars I went, landed on the roof of the Honda.

    Wrenched my right shoulder, twisted my left thumb....extremely lucky to be basically unhurt.

    The bike is ok - but neither good nor great...barely ok I guess. I've got a photo here, but it's not the greatest. I might be able to get a better one tomorrow, but I'm leaving town for a few weeks so no promises.

    Two bent fork tubes, badly bent rim, and the belly pan and fairing are trashed.

    I'm not too worried about the metal parts - I imagine they won't be too hard to find, but a marakesh red fairing and belly pan? Anyone??

    What a drag, I feel like and idiot. Thank god it wasn't worse.
    Attached Images Attached Images
    jasper
    north vancouver

    1990 K75S

  2. #2
    Registered User argent brick's Avatar
    Join Date
    Aug 2012
    Location
    Wine Country, Northern California
    Posts
    461
    That is so sad.
    Count you blessings though.
    It could have been much worse.
    How did the people in the Honda take it?

    When I was still in my teens, I rolled a 1969 Dodge Charger because I was not paying attention to what was going on. I wish I had that car now
    Lynn
    MOA #57883
    Current Ride: 1995 K75 Standard
    Past: 1978 Yamaha XS 750, 1976 BMW R60/6

  3. #3
    Dum vivimus vivamus ted's Avatar
    Join Date
    Mar 2003
    Posts
    2,589
    Sorry to hear, basically unhurt is always the best outcome for these things

    Your best bet on good replacement parts will be used parts recyclers (always my first preference), eBay, and online marketplaces like here on the MOA site, the IBMWR Marketplace, and ADVRider. Make sure to have your VIN handy (and also run it through a decoder for exact month/year of manufacture) so you get exact replacements.

    The better used parts places I have found (and I have consistently found these places to have better quality for the price parts at much better prices than eBay sellers) are: kbikeparts.com, re-psycle.com, and beemerboneyard.com. I like buying from the resellers, you can call them and ask specific questions about condition and application, and they are usually very free with good advice on things like installation.

    eBay is good but be ready to pay a premium used price for the "buy it now" guys, I usually go there when I know exactly what I need, when the recyclers are out of stock, and when I need it right now. I've also gotten burned a couple times on a seller's overenthusiastic opinion of a part's condition - usually not enough to go through the hassle of fighting over a return/refund but enough nonetheless.

    Lastly the online marketplaces - while these are and have been full of Nigerian scammers for some time, they are great deals to be had and the bad guys are pretty easy to spot. Basically never, ever wire money to anyone with Western Union or Moneygram, and talk to the person you are buying from on the phone. Look up the seller on Anywho.com to make sure he is who he says he is, and google his email and phone number to see of there are any reports of scams. If you post a WTB on the MOA Marketplace you will inevitably get a scammer responding to you within 24 hours - read this thread before placing the ad.

    Good luck with the repair!
    Last edited by Ted; 10-07-2012 at 04:27 PM.
    Ted
    "A good stick is a good reason"
    1994 K75RT
    Moto Pages

  4. #4
    Debbie's Servant Lee's Avatar
    Join Date
    May 2003
    Location
    SW Iowa
    Posts
    1,527
    Quote Originally Posted by jwetering View Post

    I'm not too worried about the metal parts - I imagine they won't be too hard to find, but a marakesh red fairing and belly pan? Anyone??
    Good to hear you did not get hurt more than you did.
    If it was me I would buy any color and have them repainted.
    Lee 2011 K1300S
    MOA # 30878
    Past BMW Bikes, 2003 K1200RS, 1991 K75S, 1987 K75T, 1984 R100RT

  5. #5
    Registered User jwetering's Avatar
    Join Date
    Aug 2011
    Location
    north vancouver
    Posts
    156
    Thanks for the sympathy gents.

    Ted - great info. I've bought more than a few parts for my vehicles on-line over the years so am aware of the trips/risks etc, been lightly burned on condition once or twice but usually it's fine. In my case I'll be refurbishing the mechanical parts anyway.

    Your links to the resellers is what I needed though so double plus super fantastic.

    It's the damned tupperware that I'm not too optimistic about. Condition and colour will make the difference and if neither are fine then that calls for dollars to be spent and "ain't nobody got time for that".

    Thanks again for the links Ted!
    jasper
    north vancouver

    1990 K75S

  6. #6
    Debbie's Servant Lee's Avatar
    Join Date
    May 2003
    Location
    SW Iowa
    Posts
    1,527
    Quote Originally Posted by jwetering View Post
    It's the damned tupperware that I'm not too optimistic about. Condition and colour will make the difference and if neither are fine then that calls for dollars to be spent and "ain't nobody got time for that".
    Keep in mind, when buying 20 year old red panels that all the pieces may not match.
    If you buy pieces from different bikes, they may have different degrees of sun fading.
    Lee 2011 K1300S
    MOA # 30878
    Past BMW Bikes, 2003 K1200RS, 1991 K75S, 1987 K75T, 1984 R100RT

  7. #7
    Dum vivimus vivamus ted's Avatar
    Join Date
    Mar 2003
    Posts
    2,589
    You also might want to look at repairing - I know I epoxied the tabs/slots where the "S" fairing all comes together behind the turn signal on my K75S when it was knocked over. It not only held fine, I had to repeat the procedure on the other side when it was knocked over on the other side a year later.
    Ted
    "A good stick is a good reason"
    1994 K75RT
    Moto Pages

  8. #8
    Registered User jwetering's Avatar
    Join Date
    Aug 2011
    Location
    north vancouver
    Posts
    156
    Quote Originally Posted by Ted View Post
    You also might want to look at repairing - I know I epoxied the tabs/slots where the "S" fairing all comes together behind the turn signal on my K75S when it was knocked over. It not only held fine, I had to repeat the procedure on the other side when it was knocked over on the other side a year later.
    It doesn't show in the photos, but it's pretty badly busted up.

    Thanks though - I will be looking at it more closely when it comes all apart.
    jasper
    north vancouver

    1990 K75S

  9. #9
    Registered User Paladinwest's Avatar
    Join Date
    Jun 2010
    Location
    BC South Central Interior
    Posts
    104
    I have patched K100RS fairings with epoxy and body filler and had good results. The K100 fairings are fibreglass and are relatively easy to patch with common materials (I assume the K75S fairing is the same material). Match the paint and you are good to go. Red paint can sometimes be more difficult but I have managed to match my metallic red K100 by using Lordco's paint match gun and their chip charts.
    Best of luck with the repairs.
    2008 HP2 Sport 10,000, 2008 R1200GSA 100,000, 1990 R100GSPD 100,000, 1986 K100RS 152,000

  10. #10
    Registered User
    Join Date
    Oct 2007
    Posts
    379
    Quote Originally Posted by jwetering View Post
    It doesn't show in the photos, but it's pretty badly busted up.

    Thanks though - I will be looking at it more closely when it comes all apart.
    I am sorry to hear about your predicament. I may be able to help. Can say more on this thread, I do not want to be "warned" about solicitation.

    Look at your PM.
    1993 K75S Mystic Red Pearl
    2007 K1200GT 997 Blue

  11. #11
    Registered User jwetering's Avatar
    Join Date
    Aug 2011
    Location
    north vancouver
    Posts
    156
    Quote Originally Posted by ghyber View Post
    I am sorry to hear about your predicament. I may be able to help. Can say more on this thread, I do not want to be "warned" about solicitation.

    Look at your PM.
    Thanks Ghyslain;

    PM is entirely appropriate - but I *did* ask so it's not technically soliciting...I don't think. Anyway - thanks, I replied to your PM.
    jasper
    north vancouver

    1990 K75S

  12. #12
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    3,425
    Gyber is correct to take this to PM. Actually requesting or offering parts for sale is not allowed on the forum: http://www.bmwmoa.org/forum/showthread.php?t=22971

    BUT, I've thought that this has been a productive thread with sources and repair suggestions being offered. As long as it stays that way, with any offers of parts being restricted to PMs, I think we can let this continue. If you have specific requests for specific parts, please use the Flea Market section.

    We all want to see you get your bike back on the road.


    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

  13. #13
    Registered User jwetering's Avatar
    Join Date
    Aug 2011
    Location
    north vancouver
    Posts
    156
    Thanks Lee;

    I certainly don't want to bend the rules on this site. PM is just better for that sort of thing anyway

    I'll stick to trials and tribulations as I go through my repairs when I post here..

    I'd like to start today, but I'm unbelievably busy until November at least.


    jasper
    north vancouver

    1990 K75S

  14. #14
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    3,425
    How to fix or where to find (suppliers and recyclers) questions are what this forum is for. We'll help you all we can.



    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

  15. #15
    Registered User
    Join Date
    Sep 2012
    Location
    San Ramon, CA
    Posts
    32
    There is a guy down here in San Francisco parting out a K75C. You might ask him about forks and mechanicals. Will need to get some of the plastics somewhere else if you can't fix it. It is in SF Bay Area Craigslist.

    David Sword

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •