Results 1 to 2 of 2

Thread: 04 rt transmission specs

Hybrid View

  1. #1
    wz31857 wz31857's Avatar
    Join Date
    May 2012
    Location
    North Hills CA.
    Posts
    37

    Smile 04 rt transmission specs

    Does anyone have the 04 rt transmission specs for bearing to bearing dimensions on the three shafts.Thats outside to outside measurement of the assembled input shaft ,output shaft,intermediate shaft.My Clymer manual does not have specs for the 04 r1150rt model. Thanks Wayne

  2. #2
    wz31857 wz31857's Avatar
    Join Date
    May 2012
    Location
    North Hills CA.
    Posts
    37

    04 transmission specs

    I can't believe no one has ever rebuilt there own transmission.I can't find anyone who will give up the specs I needed,not even the pros who rebuild ,I guess they don't want the secret out.I finally just took a stab at what would work and used my experience from other brand trans I have rebuilt.I replaced the six bearings a shifting drum and one fork.I rode 250 miles today north of L.A. in caynons shifting hard for 2 hours and a fast ride home.It's smoother than it's ever been and no more missing second.It was $96 for bearings and $70 for all the seals. The drum and fork came from an RTP trans with 18000 miles on it I cannibalized. So far So good.
    It would sure be nice to have that info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •