Results 1 to 3 of 3

Thread: 06 GSA head lamp to high

  1. #1
    Registered User
    Join Date
    Jan 2012
    Posts
    14

    06 GSA head lamp to high

    i installed a set of HID bulbs for my 06 GSA and found that there is not a lot of room within the rear side of the reflector for the extra wiring and the socket that the wires plug into. this presents a little problem of all that extra stuffing causing the reflector to tend pivot upwards so that you have a great view of the underside of the trees and on coming cars flicking you the high beams, i tried to carefully manipulate the socket so that the reflector has the least amount of push upwards. i'm wondering if there is a deeper light socket cover so that there might be more room for wiring and socket. any ideas? thanks. peter.

  2. #2
    Rider on Ramald
    Join Date
    Jul 2007
    Location
    Saint Louis, MO
    Posts
    50
    If they're anything like the DDM ones I installed on my RT, the biggest thing is to gently pull the wires through the rubber seal on the hard-plastic headlight access panel from the outside. You're trying to get as much of the wiring pulled outside the cap...
    http://www.bmwmoa.org/forum/attachme...1&d=1346984433
    Attached Images Attached Images

  3. #3
    Registered User
    Join Date
    Jan 2012
    Posts
    14
    Idis; did that, thanks. peter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •