Results 1 to 3 of 3

Thread: R1200GS fitting replacement foot pegs

  1. #1
    Registered User
    Join Date
    Jul 2012
    Location
    Ladera Ranch, CA
    Posts
    23

    R1200GS fitting replacement foot pegs

    Just about to replace my foot pegs on my R1200GS Rallye 2012.

    I cannot get the bolt out on the gear change side.

    Do I just need to jiggle it a bit more or does the gear change leaver need to come off?

    Thanks

  2. #2
    Registered User
    Join Date
    Mar 2011
    Location
    socal
    Posts
    355
    Mark and remove gear selector, when replacing you may want to rotate it counter clockwise a notch to match up with lower pegs

  3. #3
    Cam Killer marchyman's Avatar
    Join Date
    Jun 2008
    Location
    SF Bay Area
    Posts
    3,302
    On some bikes (my '05 for example) the shaft is marked and the slot in the lever is supposed to line up with the mark. There is supposedly a warning that says you shouldn't mis-align the lever. I don't know why.

    Maybe it's like the warning about not running the saddle with the front in the high position and the rear in the low position...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •