2005 1200 GS with 41,000 miles. Below is the official BMW warranty print out of the warranty repair work done to my bike. Note the defect codes listed for each repair of the warranty repairs for my output shaft, transmission input shaft seal, Compensating shaft seal, new clutch, clutch cylinder and clutch seal. I am not sure if I should have been given the printout. This is just a summary of the printout, the original copy that I have has across the top"not to be distributed or shared with third parties except for specific information that may be required by law" Note: the mileage on some to the warranty repair is not correct. Has anybody had any luck getting BMW to replace the engine because of multiple seal failures?

Also, is there anyway to contact the regional service rep directly? I am not having much luck with the local BMW dealer. I have the bike back in the shop for because of the telltale signs of leaking engine/transmission seals. According to the service writer there is no way of knowing if the seals are bad unless you break the bike apart($1,500). Which means I will not know if the seals are covered by the 2 year parts and labor warranty till they determine which seals are leaking. A couple of the seals are 29 months old.

I would love to talk to someone other than BMW customer service(they are nice but have no authority), the local BMW service writer(not very nice and sees this as a problem he would rather not deal with) and the BMW regional service rep(that will not be contacted until the bike is broken apart, i.e.$1,,500)

Thanks for any feedback

2005 R1200GS vin: .77208 05-30-2012
Owner: Randy
07-14-2007 Miles: 12,555 First reported oil leak. Service writer said to monitor leak
------------------------------------------------------------------------------------------------------------------------------------------
04-09-2008 Miles: 15,444 Little Rock BMW Warranty 0004995-134
Defect Code: 1111584800 Shaft sealing ring
Output shaft
Clutch end leaking, installed new clutch
Clutch Plate BMW 21217697737, Shaft Seal BMW 23127683995, Drive Shaft Seal BMW23127656019
Compensating Shaft Seal BMW 11117685005
------------------------------------------------------------------------------------------------------------------------------------------
10-22-2008 Miles: 3,847??? Little Rock BMW Warranty 0006037-1083
Defect Code: 2312004800 Sealing ring
Input shaft, front leaking
Transmission Input seal BMW 23127705086
------------------------------------------------------------------------------------------------------------------------------------------
02-04-2010 Miles: 27,538 Little Rock BMW Warranty 0008199-3346
Defect Code: 2312004800 Sealing ring
Input shaft, front leaking
Transmission Input seal BMW 23127705086, Compensating shaft seal BMW 1117685005
------------------------------------------------------------------------------------------------------------------------------------------
07-28-2010 Miles: 30,606 Warranty
Defect Code: 1127064800 Shaft sealing ring, Compensating Shaft
Compensating Shaft Seal BMW 11117685005
------------------------------------------------------------------------------------------------------------------------------------------
05-20-2011 Miles: 36,438 Warranty
Output rear/ cylinder clutch
Output Cylinder clutch BMW 21527724542, Seal, Clutch M/C 23127705085