1600 Mods, Farkles and Other Refinements

[Jogitu]

So what have you done to your 1600 and please, please, please post a photo so we can all see the wisdom of the mod. We all are learning here so let's pave the way for others. I will when the mods are on I promise.

[dmftoy1]

ImageUploadedByTapatalk1334853339.780170.jpghere's a picture of me 60lbs ago. . Since then I've added Russell day long seat, engine bars, ilium works highway pegs, a ztechnik windshield and cee bailey bag liners. When I drop another 60 I'll post another picture.

[Jogitu]

ImageUploadedByTapatalk1334853339.780170.jpghere's a picture of me 60lbs ago. . Since then I've added Russell day long seat, engine bars, ilium works highway pegs, a ztechnik windshield and cee bailey bag liners. When I drop another 60 I'll post another picture.

Congrats on the 60lb loss. That's like gaining horsepower. What engine guards did you buy and would you do it again? Same with windshield.

Good luck on the next 60!

[dmftoy1]

I got the BMW guards and they seem fine. Windshield is better than stock but I suspect there's better out there now or will be shortly

[kaygee]

Debadged chrome GTL strips
Hard Wired plug for my earbuds
Tennis Racquet Tape and Grip Puppies
Illum Floorboards and shift extender
RKA bag liners
Reflective tape for bags
Piaa H7 High Beam Bulbs
Direct to battery pigtails for Battery Tender and Gerbings Heated jacket

Russel Day Long Seat (production scheduled late September)
Cee Bailey Windshield with vent (waiting for delivery)
Skene P3 taillights (waiting for delivery)

[jbernel]

How did you wire the bike for your earbuds? Thanks
Jeff

[kaygee]

How did you wire the bike for your earbuds? Thanks
Jeff

Disconnect the speakers and wire them into a Line Level Adaptor then drilled a hole in the side pannel to mount the plug. I had the same setup on my LT.


Clarion CCAAUX Female 3.5mm Stereo Mini-Jack to Male RCA Extension Cable with Integrated Cover $22



Stinger SGN13 Adjustable Line Output Converter $22

[jbernel]

Thank you! Very helpful.
Jeff

[Inga2011]

[QUOTE=kaygee;816371]Disconnect the speakers and wire them into a Line Level Adaptor then drilled a hole in the side pannel to mount the plug. I had the same setup on my LT.


Can you tell me the advantage to using a line level adapter to RCA with the female 3.5 mm plug end versus just hooking up a 3.5mm female plug on a pig tail right to the speaker wire?

[kaygee]

[QUOTE=Inga2011;828414]

Disconnect the speakers and wire them into a Line Level Adaptor then drilled a hole in the side pannel to mount the plug. I had the same setup on my LT.


Can you tell me the advantage to using a line level adapter to RCA with the female 3.5 mm plug end versus just hooking up a 3.5mm female plug on a pig tail right to the speaker wire?

It will be too loud if you don't use the line level adapter even on the lowest setting. Your earbud speakers can't handle the same power as the dash speakers.

[EMSimon]

I color-coordinated mine with my dogs fur.

[Roadkill601]

Wow that looks great..

That Back Rest... Where did you get that? I was looking at the Sargent one.. .The one you have looks much nicer!

[PittsDriver]

I color-coordinated mine with my dogs fur.

But will he ride with you?

http://youtu.be/xdj67XknFrM

[EMSimon]

Wow that looks great..

That Back Rest... Where did you get that? I was looking at the Sargent one.. .The one you have looks much nicer!

The back rest is from Bak-Up (sp ?) It is the one for the R1200RT, which fits the 16GT.
As does the top case, which I use also, instead of the oversized and overpriced case for the 16.
Installation is a breeze. I usually switch back between back rest and top case in 5 minutes.

[Roadkill601]

The back rest is from Bak-Up (sp ?) It is the one for the R1200RT, which fits the 16GT.
As does the top case, which I use also, instead of the oversized and overpriced case for the 16.
Installation is a breeze. I usually switch back between back rest and top case in 5 minutes.

Awesome Thanks... My Wife will love it!