Results 1 to 2 of 2

Thread: Convex mirror

  1. #1
    Registered User
    Join Date
    Feb 2012
    Location
    Kansas City, MO
    Posts
    34

    Convex mirror

    Looking to improve rear view and saw these. Has anybody tried them? If so how do they attach?

    http://www.autobarn.net/auxwidmir.html

  2. #2
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,614
    I ran a very much similar mirror on my K100RT. Worked very, make that, extremely well. The brand I used was Hercules. I wouldn't be surprised to find that both mirrors are produced at the same maufacturer. The curved housing has a screw in the back that allows the mirror to be removed from the curved housing. A three sided u- shaped metal bar is inside. This bar slides on over the stock rear view mirror and is clamped down by 2 supplied screws in the bar. You can use some clear mylar or tape to keep the metal off the paint of the stock mirror. Pretty simple procedure. I applied the mirrors to both stock mirrors. I had the full vision the stock mirrors supplied and the add on mirrors covered my blind spots. I also believed what I was seeing. 2 thumbs up. I would guess it to be a 1 hour job to attach.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •