Results 1 to 15 of 27

Thread: 1985 K100 Drive shaft splines

Threaded View

  1. #15
    Registered User
    Join Date
    Apr 2005
    Location
    Kansas
    Posts
    231
    Quick and dirty answer with a fuzzy picture. I am not a mechinist but I have extra nerve and spare FDs. The space you need to fill is at the mating joint of FD and DS. There is only 14 mm of distance in that cavity. So I have center punched 7 mm from the mating edge. I have not done this yet but I plan to make my own plug from a shortened bolt with a 8 mm by 1.25 thread and a 8 mm crush washer. The final drill will be a 17/64 bit. If there is interest I will photo the procedure. Harold in Kansas
    Attached Images Attached Images
    Harold In Kansas
    1985 K100RT Bullit
    1985 K100XX/EML Bemel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •