Results 1 to 13 of 13

Thread: /2 conversion

Threaded View

  1. #1
    1960R100S 46211's Avatar
    Join Date
    Mar 2009
    Location
    Crown Point IN.
    Posts
    110

    /2 conversion

    Hello every one. Will I am o most done with a 2 year long conversion bike build. Took one year to get all the parts together. I don't know if any one is thinking about building one or doing one right know. My starting point was a 1965 frame, had a 77 R100s motor(last year for mech tach ), /5 headlight bucket and speedo, r65 lens-reflector H4 bulb, /5 wiring harness. I put the coil,starter relay, volt reg all under the tank with fab up brackets. The gas tank has a fuel valve on both sides know. /5 starter switch. Keeping the stock horn and headlight switch from a /2. The big thing I had a problem with was the drive shaft. I won't to use a /7 with a mech /2 bell but did not fit. Got the adapter plate and using a /2 drive shaft. I can wait to ride this bike. As soon as I'm done ill put pic up.
    Last edited by 46211; 02-07-2012 at 03:38 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •