Results 1 to 7 of 7

Thread: newbie looking for throttle syncing experience with veteran wrench in New York

  1. #1
    Registered User
    Join Date
    Apr 2007
    Posts
    35

    Question newbie looking for throttle syncing experience with veteran wrench in New York



    I own an 2000 r1100 rt and have moderate wrenching experience: valve adj, all fluids, cable replacement, etc. but have never sync the throttles before. The dealer has.
    I own a twinmax and would be happy to meet you at your home or destination convenient for you. I have read the TBSD (throttle bottle syncing for dummies and Kulow and Co's. tech topics as well.) I still would like to get a hands on demonstration from a confident wrencher. Happy to supply the beer and good company.

    I live in Dutchess County and commute to Long Island on occasion. Anyone who lives on that route or nearby feel free to drop me a line.

    thanks.
    Last edited by beamercon; 07-04-2007 at 09:16 PM. Reason: added smilies

  2. #2
    Registered User glwestcott's Avatar
    Join Date
    Dec 2005
    Location
    Stockton, CA
    Posts
    305
    I don't live in New York, so can't do it with you, but just wanted to say that given all else that you have done, this is simpler than just about anything else. Goes very easy and quickly with a TwinMax. The TwinMax instructions should be followed to insure that you have the unit itself zeroed out before you start the bike, but other than that and having a warmed up engine to begin with, its a snap. I find it goes so quickly that I have never had the need to set up a fan blowing on the engine. By the way, I have a 2001 RT and have found no need for further adjustments the last two services.

  3. #3
    BUDDINGGEEZER
    Guest

    carb sync

    I have never synced BMW R carbs, but have many times on 2 carb v-twins. It is not hard. On most brands one carb is not adjustable, it is the baseline. You balance the other carn vacum to it.

    The cheapest and most sensitive carb balancer can be found at http://www.powerchutes.com/manometer.asp

    I use 2 stroke oil because it is usually died to see better and if you knock one hose off and the engine ingests the oil, it will just burn it. No harm done. (Not my first rodeo).

    You can build the manometer for under $5.

    Ralph Sims

  4. #4
    Registered User
    Join Date
    Sep 2008
    Location
    Planet Earth
    Posts
    275
    The cheapest and most sensitive carb balancer can be found at http://www.powerchutes.com/manometer.asp
    Great link and idea! Not sure why I didn't think of this before. Simple and accurate.

  5. #5
    Registered User Olsensan's Avatar
    Join Date
    May 2008
    Location
    Adirondaks and LI,NY
    Posts
    461
    Where are you beemercon? I'm in Wantagh, LI or upstate NY in the Adirondaks. I have done this on my RT many times. Send me a msg at grego1@optonline.net
    -Greg

  6. #6
    Registered User
    Join Date
    Apr 2006
    Location
    ct
    Posts
    37
    how far from ct. i am in new milford. off rt7, 55 and 22 nearby.

  7. #7
    Registered User
    Join Date
    Jun 2003
    Location
    Northern Front Range, CO
    Posts
    6,422
    hey guys- check the date. beamercon is "a few miles", and 4 years from CT!!

    i've noticed a rash of zombie resurrections of late. not sure why its happening , but reviving these long dead threads sure can create confusion.
    Ride Safe, Ride Lots

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •