Page 17 of 41 FirstFirst ... 7 15 16 17 18 19 27 ... LastLast
Results 241 to 255 of 602

Thread: Mid-South ride, eat, and meet

  1. #241
    Registered User
    Join Date
    Jun 2012
    Posts
    2

    Question Blue Ridge Parkway

    Anyone riding to the blueridge parkway on 8/25/12?

  2. #242
    Registered User linnemj's Avatar
    Join Date
    Jan 2010
    Posts
    5

    Last Dam Rally

    Most of what you have heard about the RAMs upcoming rally at Pickwick is true. We will be moving on from our rally home after 2012. Please come help us celebrate on October 5-7th, the last dam rally. There is no rally fee! The club is picking up the tab for pins, refreshments, music, awards,ect, and we have a slew of door prizes to give away. You pay for camping and Tim will be there to serve his famous BBQ dinner for $10 a person. There is no good excuse to miss this one!

    Jim & Nicky
    Northern Mississippi

  3. #243
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    I havn't riden in over 9 months, until yesterday. I've had my '71 R50/5 over at the West Memphis Airport hanger for a basic service and fix a few issues. Spline lube, all fluids changed, new center stand springs mounted. I had taken the bike over on a trailer without a seat. I found some old tent material, shop rags, and cardboard and made a quick copy of a Daylong seat and rode the bike home. Thx guys for all the help. They took some pics of my creation, maybe they will post them. Felt good to be back in the wind.

  4. #244
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    The flyboys just called from the hanger. Fixxin to head over and see what's on the 'itenery' for today.

  5. #245
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985

    No-Mar

    Was just reading karlfitt's nomar rant in Campfire. A couple of months ago the Flyboys over at the hanger got word that the old owner of the Coats tire changing machine was inquiring about whether he had given the machine to them or was a loan. It was a loan and the machine was leaving. Good. That machine could do the job, but a person could lose a finger or hand in the process. What a contrapton. Anyway, about that same time I got a call from my bud Don Quales about a nice deluxe Nomar machine for sale over in Martin, Tn. Had him send fotos and pertinent info over to the flyboys. That weekend a secret mission was inacted and the machine was retrived and is now ensconced at the hanger. We all chipped in a C note, to cover the cost. The first Friday we had it, Rick used it for a tire change and I missed the inauguration . Hopefully, now worrying about expensive, dangerous tire changes are a thing of the past.

  6. #246
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985

    Bikes on Beale St. Memphis, Tn. 2013

    If your in Memphis,Tn. on a Wednesday night, Bikes on Beale is going on till Oct. Starts about 5:00pm till around 10:00 pm. Traffic is one way from 2nd to 4th., Eastbound. Pull up and park your bike Main St. Daytona style. Plenty of good restaurants, bars, and good ol Blues, Rock, Rockabilly music.This is a Bikenight not to miss. Do a web search For Bikes on Beale 2013, or Beale Street Merchant for more info and pics. Nice way to end hump day. Usually lots of ELVIS sightings.

  7. #247
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985

    RAMS August meeting

    RAMS Aug. meeting this Sat. Aug. 10 at Our Favorite Place, A Mexican bar and grill. 880 N Germantown Pkwy Cordova, Tn. 38018 Lunch at noon and the meeting follows about 1:30. Guests are welcome. If you ride a R100 Exclusive Sport, R100 RS JPS, or have access to the one and only R7, bring it over so I can see it.

  8. #248
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985

    Perfect weather for August

    Last night at Bikes on Beale, the weather was mauvalous. To have temps in the high 70's, no humidity, and a light northern breeze was somethin special. Sure beats the usual. My first ride over to Beale this year on two wheels and the R50 ran like a swiss watch. Life is good.

  9. #249
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    Rode alittle further Sunday, north on Hiway51 to the winery. Got there and kept heading north on the backroads up to the old ShakeRag store/bar&grill. Pretty much only a concrete slab. Kinda sad to see it like that. Rode back to the winery, and got a bottle of white wine. Weather was perfect, but I was the only customer. Drank one glass, then was joined by about 10 bikers on new H/D's. They were a funny bunch, we finished off a couple bottles of wine, then We took off for Hadley's in Bartlett. Hadley's was the biker bar of choice for Wendesday bike nite in Memphis 10 years ago. The band was too loud for me so I sat ouside on the patio and enjoyed a cigar. The R50 was the only non Harley in Bike row in front of the bar and it drew a fare about of attention. I rode over to Ron's, and picked up a 27m socket he had turned down to fit an airhead Beemer swingarm nut. The flyboys will be happy. Then it was off to the house. About 75 miles of riding for the day total.

  10. #250
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    I started freshening up my '74 R90/6 over 10 years ago. I did a good engine upgrade, bored the cylinders, installed new 1st over pistons, reworked the heads, new valve guides, seats, dual plugged the heads, etc. Job changes, family illness, lack of funds etc. all delayed getting the bike together. All the usual distractions we all have. I decided to start doing a few small things to move the project along,till I can get going on it in a more pronounced fashion. I'm converting the bike from a bench seat to a solo springer seat. Since the bike will be a solo seat most of the time, I wanted to do away with the passenger foot pegs for a cleaner look. I'm running Wixom bags with nerf bars around the bags. One of the mounting points is the passenger pegs. If the pegs are removed only the round serrated tangs remain. Hard to mount to that. I had an old wrecked airhead frame with the serrated mounting points. I had a round metal hole saw that fit over serrated tang. I mounted the hole saw to a drill motor and in short work the serrated tangs were in hand. The back side was rough and jagged, so I gave them to Ron to put in a lathe to face off and chamfer, probably a year ago. Yesterday,Ron handed both tangs to me along with the socket. These 2 pieces will be powdercoated along with the frame. These 2 pieces will mount to the serrated tangs on the bike so I now have a flat surface to mount the nerf bars. I have now succeeded in a very small step to move the bike along to completion. I have learned to be patient. I have some more projects, that I farmed out and their close to completion. This will allow the pace of the project to pick up at a faster pace.

  11. #251
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    Years ago I acquired 2 used Teutonic touring saddles. Both may be knockoffs. One was pretty much the standard set up, but the other was raised about 1 1/2 inches higher. Both mounted to the frame in the usual manner, the oval shaped tube that slipped in the oval shaped backbone of the main frame and the back which sat down on the cross member of the subframe. Hose clamps straped them down in the back. All of this is visable and it looks really cobbled to me. They work, but I wanted a more finished factory look. My buddy who's dong the fabrication agreed that the look was not acceptable. He's converting one to be adjustable to several heights, with a better mounting system. So as soon as I get them back for inspection and approval, hopefully the build will pick up steam. Patience bah, humbug.

  12. #252
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    Another job I have to address is engine. The part with the problem is the timing chain cover. I'm kind of a self taught mechanic and I can be a little hamfisted at times. I got a little rough changing the points seal out and I think I created a leak at the end of the cam at the seal. I had an old airhead head engine so it donated it's timing chain cover. I think that a new cover will stop the leak at the seal . The timing chain cover has been bead blasted and steam cleaned and is ready for install. I think I'll let my engine building bud do the job, I really don't want any more oil weep around the points area. I won't be running points, but that's another story.

  13. #253
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    I missed last week's Old Bike Club ride. They rode out to the Shelby Forrest Store, then north to Randolff and John's Boatdock overlooking the Mississippi River. Can't believe I missed that ride. The Flyboys are out of town so I didn't go out to the hanger. I guess it's out to the shop and work on something.

  14. #254
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    Took a freight load down to Larado a couple of weeks ago. Then did a couple of mini freight runs down to Brownsville and back to Larado. Didn't want to sit in the heat of south Texas, so I headed north. Stopped in for a visit to Alamo BMW. Allways neat to see some cool old cars they work on. Headed home. Took the R50 out last Sunday for a ride. Did the usual. Lunch at the Shelby Forrest Store, rode over the bluff to Shake Rag, hung out with the bikers. Backtracked on the backroads to Old Millington Winery. Big crowd due to the band. Met some new friends and shared a bottle of Delta Blush. Headed back into metro Memphis and stopped in Hadley's in Bartlett. Hung out with the bikers I met at shake Rag. Riding home I noticed had no free play in the clutch. Gotta adjust it out before the next ride. Really feels good to get to do a little riding.

  15. #255
    Registered User
    Join Date
    Aug 2003
    Location
    Marion,Ar.
    Posts
    4,985
    Got the R50 out and did the clutch lever adjustment. The right mirror gave a good view of the local cotton fields, after a quick adjustment I had a proper rear view. Off to Beale Street to see the bikes, hear some blues and watch all the pretty ladies walking on Beale. Our usual crowd was there enconsed for the night. Nice night to be out; hopefully the event will continue till November. When I left, I could feel the sidestand dragging down the street. Stopped and retracted it, gotta get my rider skills back up to speed. Oh well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •