Page 1 of 2 1 2 LastLast
Results 1 to 15 of 25

Thread: Ear Buds/Hearing Protection durability

Hybrid View

  1. #1
    GREGFUESS
    Guest

    Ear Buds/Hearing Protection durability

    Does anyone use ear buds to combine communications with hearing protection? I am hard of hearing, and would like to protect what hearing ability I retain by wearing hearing protection, basically ear plugs.

    I also like to hear music while riding. Wearing ear plugs and then turning up the volume on helmet mounted speakers seems at odds with each other. Wearing ear plug speakers allows me to adjust the volume sitting still and eliminates the need for volume adjustment while riding.

    A Big Ear, Inc representative told me that on average, their ear plugs with speakers, the BE-1Cs, last about 2.4 years before they are returned for service broken because ear wax builds up in the speakers, preventing sound from coming out.

    How long do your in-ear plugs/speakers last? The product prices seem to be a down payment on something you then pay ~$80 every 2.4 years to maintain. Does anyone have another way to protect hearing and listen to music? Could you speak up, I can't heat you?

  2. #2
    Curmudgeon At Large Bobmws's Avatar
    Join Date
    Mar 2003
    Location
    Astatula, FL
    Posts
    1,128
    Disclaimer: I sell some of these as a part time business.

    I personally have a set that is 12 years old. Some people are harder on them than others. I have a few customers that regularly need repairs every few years, and others that don't have issues. I can't say if the failures are use (more miles) related or not. Biggest issue is people using the wires to remove them.

    A speaker tube blocked with earwax in not a cause for an $80 repair. Frankly those who are ear wax 'producers' are generally aware of that and take more precautions in their personal hygiene. BTW, ear wax is caused by over active oil glands that produce lubricant for the skin in the ear canals. The excess oil that is not absorbed in the skin gathers dust & dirt to become earwax.

    Some advances in technology have increased the sturdiness of stress relief at the solder joints to the speakers helping to reduce wire breakage failures. Sometimes a speaker just fails. If the set is a few years old, replacing one speaker usually results in the older speaker sounding weaker, so replacement of both is recommended.

    Custom molds generally retain their shape for years, but your ear canals can change shape due to weight gain / loss (as little as 10-12 lbs) or illness.

    So, how long do they last? There is no definite answer. If they work for you are they worth a maintenance investment every few years? If you want communication or music you need protection as well. I was just fitted with $5000 hearing aids due to damage incurred years ago, some from riding, some from things that go bang, most from my work environment, so it's your choice.
    Bob Weis
    '04 K12RS - Hannigan Hack
    www.earplugco.com

  3. #3
    Outlander Omega Man's Avatar
    Join Date
    Jan 2010
    Location
    Mansfield,MA
    Posts
    6,458
    Ear protection for me is a problem, I've got Tinnitus. It's the crazy ringing-well actually a cross between a whistling tea kettle and a summer night-that you may have heard of. If I use ear protection it leaves no background noise to diffuse the ringing. When I run heavy equipment I use muffs with FM radio inside. On the Motorcycle, with the helmet, I just started to listen to music on a I-Pod. It's not perfect but with the wind noise of the helmet and the Tinnitus-which is a conversational volume-it helps. I recently switched to Skull Candy ear buds which are about $10.00 at Target. They provide a good balance of noise suppression and I enjoy the background music. The Skull Candy buds are comfortable for quite some time. and priced well enough that when I wreck them I don't feel to bad. Gary
    "Well they say.. time loves a hero but only time will tell.. If he's real, he's a legend from heaven If he ain't he was sent here from hell" Lowell George
    2009 F800GS 1994 TW200
    Part of the Forum Threadside Assistance Program

  4. #4
    Just me rad's Avatar
    Join Date
    Apr 2003
    Location
    Santa Cruz
    Posts
    825
    Arizona Al makes these, he attends most of the rallies and posts on the sport touring forum. They are Big Ears with special remote speakers. They work fantastic for sound quality, zero pain, good noise canceling. I have used a number of different ear buds, including the expensive er-6’s and these are far better.

    Using ear plugs or these molded ones and dumping my noisy Schuberth helmet and getting rid of my GS has brought me relief from my Tinnitus.

  5. #5
    Registered User
    Join Date
    Sep 2005
    Location
    Eastern KY
    Posts
    3,247
    For most of us with titinitus, selling a bike ,etc., will not make it go away-I wish!Hpw much does Arizona Al charge for the ear molds?

  6. #6
    Tame Racing Driver Stig's Avatar
    Join Date
    Dec 2009
    Location
    Hudson Valley, NY
    Posts
    262
    I use a pair of these Sony ear bud headphones on my RT and am very pleased with them. They do a fine job blocking out most wind and engine noise come with a few sets of removable (for cleaning) rubber ear pieces. I prefer the softest ear piece, which remains comfortable after several hours of riding. I also like that the wires come in at a 90 degree angle, which means that the backside of the headphone does not stick out very far, and doesn't get crushed into my ear canal by the helmet.
    Craig
    New York's Hudson Valley Region
    2009 R1200RT
    MOA #146131 IBA #55715

  7. #7
    Just me rad's Avatar
    Join Date
    Apr 2003
    Location
    Santa Cruz
    Posts
    825
    Quote Originally Posted by kantuckid View Post
    For most of us with titinitus, selling a bike ,etc., will not make it go away-I wish!Hpw much does Arizona Al charge for the ear molds?
    I'm sure you are correct, there must be all different levels/degrees of the malady.

    I guess I was lucky, most of mine was caused by long rides on a bike with very poor wind management and a terrible helmet. The ringing would stay with me for days on end after a long ride or tour. Getting on a bike with good wind management and a quieter helmet got my titinitus under control so I hardly notice it now.

    I think Al's ear buds were a couple hundred bucks, if I remember correctly.

    Here is a link to another thread about Al on this forum and it includes AlÔÇÖs email.
    http://www.bmwmoa.org/forum/showthread.php?t=44776

  8. 10-27-2010, 01:37 PM
    Reason
    duplicate

  9. #9
    Where does this road go?? Gottago's Avatar
    Join Date
    Oct 2004
    Location
    Southern Oregon
    Posts
    30
    Quote Originally Posted by Rad View Post
    Arizona Al makes these, he attends most of the rallies and posts on the sport touring forum. They are Big Ears with special remote speakers. They work fantastic for sound quality, zero pain, good noise canceling. I have used a number of different ear buds, including the expensive er-6ÔÇÖs and these are far better.
    I also have Arizona Al's earplugs now for about 5 years. They are fantastic. What's different with Al's is the special tube from the speakers to the custom molded ear plugs. And if you're real careful and it gets plugged you can pull it out and snip off the plugged area and reinsert it. I think the price is approx. $200. Best money I've ever spent. Gotten me across Nebraska in the middle of summer without going mad.

    Side note: Rad - is that an ipod remote and who makes it?
    "If they are running you out of town
    get in front of the crowd and make it
    look like a parade!"

  10. #10
    dstuckmann
    Guest

    S Plugs

    I use S Plugs from Plugup and I'm happy with them. They fit in the ear canal and have user replaceable tips for $8 a pair. Molded ones are available as well.

    http://plugup.com/cart/index.php?mai...=index&cPath=9

  11. #11
    Rally Rat
    Join Date
    Dec 2005
    Posts
    280
    I have been using Big Ears for about 5 years with excellent results. Mine can be worn all day without discomfort and are excellent noise protection even when I turn the MP3 player off.

    But as mentioned, the fit is the thing. Without a proper fit, any ear devise is not worth the material it is made out of. I would strongly suggest you have the fitting done in person and by an expert.

  12. #12
    Registered User froggy's Avatar
    Join Date
    Feb 2010
    Location
    Ballwin.MO
    Posts
    253
    [QUOTE=Gottago;627108]I also have Arizona Al's earplugs now for about 5 years. They are fantastic. What's different with Al's is the special tube from the speakers to the custom molded ear plugs. And if you're real careful and it gets plugged you can pull it out and snip off the plugged area and reinsert it. I think the price is approx. $200. Best money I've ever spent. Gotten me across Nebraska in the middle of summer without going mad.

    Side note: Rad - is that an ipod remote and who makes it?[/QUOTE
    Looks to me like it is similiar to my Ijet remote,but it looks to have the Monster Cable logo on it.
    As for my Ijet,it plugs into the bottom of my nano.It comes with a seperate wireless remote that I velcro to my clutch res. cap.It will change songs forward and back,decrease-increase volume and pause unit.You can even charge your unit thru the adaptor that is plugged into the bottom of your nano.I love mine and listen to music all the time on the bike,and when I get tired of the music I hit pause and allow the earbuds to reduce outside noises.
    Hope this helped.
    We drove all this way for a DEAD END ! My son!!!

    02 Silver RT1150 My 1st BMW Bike
    Craig

  13. #13
    tbourque
    Guest
    I tried several off the shelf plugs and was not happy. Mostly because when I put my helmet on (I wear a full face that fits snug) the earplugs would loose their seal and I would get outside noise. I tried three different styles. Then I went to a local audiology specialist and was fitted professionally. It took a couple of times to get the fit right, so I was glad I had someone who was selling the product also doing the fitting. There was a 90-day fit guarantee and they stood behind it. Fortunately, I was aware of the fit as soon as I put them in and we refitted on the spot. We did get it right and I am very happy with my earpieces. They fit well and the speakers are high quality. The cost....about $250 and very well spent. Ditto on the previous remark about durability. Although I've had them less than one year, the specialist was very specific in saying the durability is directly linked to removing the pieces by the body and not by the wires. $250 when compared to permanent hearing loss is very cheap!! As for ear wax buildup, the units are easy to clean with something small.

    Good luck!

  14. #14
    Registered User
    Join Date
    Aug 2009
    Posts
    259
    I bought some earbuds last year that work well for about $20. They are Altec Lansing. I bought them at Best Buy. They had a large selection of "noise-isolating" earbuds, most in the $20 range. I use them with an MP3/Radio combination. As far as I can see, all the earbuds described as "noise-isolating" are basically ear plugs with a built in earbud. Noise-cancelling earbuds use electronics to reduce background noise, but are much more expensive, and reviews I have read by riders indicate they are not nearly as effective as noise-isolating.

    When I put these earbuds in with the music turned off, they work just as well as my earplugs.
    Glenn
    2003 F650GS Dakar

  15. #15
    Registered User
    Join Date
    Sep 2005
    Location
    Eastern KY
    Posts
    3,247
    I sneak this comment in whenever it fits: Noise induced hearing loss is progressive and the damage accumulates without recovery. I have long been at that point that the ringing never stops. I also have long been involved with protecting what little hearing I have left-this means I never-NEVER!- run anything that makes noise without the muffs or plugs. ATGATT should include this idea.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •