Results 1 to 3 of 3

Thread: Shoei Syncrotec Problem

  1. #1
    Non Professional Traveler Dawgmiester's Avatar
    Join Date
    Jun 2003
    Location
    Superior, WI
    Posts
    87

    Shoei Syncrotec Problem

    I was out on my snowmobile this weekend and wearing my Shoei Syncrotec helmet. I have never experienced any problems with this until yesterday. I could not get the helmet to lock shut on both sides. What an uneasy feeling knowing that your helmet is not safe. I am guessing that this problem must have been due to freezing up of the mechanisms inside the helmet, as it seems to work fine now that it has been inside overnight. Now that my trust in the helmet is gone, I feel that the helmet is useless to me.
    I am not sure how many of you use the same helmet on both your snowmobile as your cycle, but I just wanted you to be aware of a possible problem.
    I am wondering if anyone has experienced this with this helmet? And would you still trust it?
    Dennis M. Schultz
    Superior, WI
    2007 R1200GS Adv.
    1987 K75T
    With a motorcycle all roads lead to the end of the world, if one has but the courage to follow them.
    Adeline VanBuren 1916

  2. #2
    Registered User RT_Guy's Avatar
    Join Date
    Jul 2004
    Location
    West Virginia
    Posts
    189
    I wear a Syncrotec and haven't experienced that problem. When mine was about 3 months old, the screws and springs on one side of the visor mechanism came loose. I finally got it all back together and found every screw on both sides were loose. After tightening everything, I've had no more problems in 3 years.

    I'm thinking of replacing it with a Nolan next time. IMO, the Synchrotec is overpriced for its quality, noisey, doesn't have a removeable liner and the visor doesn't seal well onto the chin piece. I like Shoei's full-face helmets and their fit, but am not all that happy with the Syncrotec.
    --John, '04 Titan Gray R1150RT
    "Montani Semper Liberi"

  3. #3
    Lazy Lightning BobFV1's Avatar
    Join Date
    Dec 2004
    Location
    Fairfax County, VA (Washington DC Area)
    Posts
    735
    RT - My experience with the Syncrotec have been very similar to yours, except I had one screw come out and become lost while out on a long ride and I had to remove the visor and ride home with bugs between my teeth. It is noisy and the lining doesn't come out. It also presses flat down aross my forehead.

    Anyway - I have changed the visor hardware, tightened everything up, and passed the helmet down to my wife, who seems to like it. I went to a Schuberth Concept - I really like the built-in dark visor.

    Oh - and Dawg, haven't had the freezing problem here in Arizona....
    BobFV1
    2010 R1200GS - "Sieglinde"
    2008 550i

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •