Results 1 to 7 of 7

Thread: Any tips for removing front wheel?

Hybrid View

  1. #1
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918

    Any tips for removing front wheel?

    Am going to get the front tire replaced at only 7500 miles. Tire just showed up at my door 5 minutes ago. Need to remove the wheel. Planning on taking pics and maybe doing a DIY article.
    Only question is, without having a wheel lift, if I want to do this solo, on what to use to hold the rear of the bike down to get the front wheel up to pull the axle and roll out the wheel?
    Is it neccesary to pull the calipers? Have a home made tool to remove the axle itself.
    I want to do this tonight, so am a little time-critical. If I can't find a safe way to do this, I'll use the buddy system.
    Gilly
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  2. #2
    Honey Badger Semper_Fi's Avatar
    Join Date
    Aug 2008
    Location
    Kingston, NH
    Posts
    5,725
    Gilly - I got the front wheel jackjust for the purpose. Also afaik you need to remove the calipers to pull the wheel off.

    In the User Manual there is a section on removing the front wheel. You need to remove certain bolts and not others.

    Good Luck! will be intersting to see how you do this.
    2011 R1200 GSA Smoke Grey Metallic Matt
    2009 G450X White
    IBA #35651
    Rogue Moderator

  3. #3
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    The buddy system i know will work. The only problem is my "buddy" is too light to push the back down far enough to remove the wheel. So I might be doing the pushing and she might be pulling the axle out. Yes, I know about only removing the one pinch bolt. Will check owners manual to be sure.
    Trying to remember how to start a DIY thread, if I need authorization to do that. Also, how did I do that thing where I could make the cirles and line and text on my photos?
    Gilly
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  4. #4
    Registered User
    Join Date
    May 2007
    Location
    Milledgeville, GA
    Posts
    36

    Front Wheel tips

    Check out this site, good tips for front wheel removal: http://www.k-bikes.com/forums/showthread.php?t=3534

    Looking forward to seeing your DIY article.
    Hal

  5. #5
    What, me worry? GILLY's Avatar
    Join Date
    Jul 2007
    Location
    Evansville, WI
    Posts
    1,918
    Got the wheel removed, so all set to have the tire replaced tomorrow. I'm not doing the tire myself.
    Will get something written up after i get the pictures of reinstallation.
    It was pretty crude what I did, but I believe might help someone out in a desperate situation. Or someone as cheap as i am.
    Gilly
    87 K75S, bought new, now sold
    07 K1200GT Bought new, now traded in
    13 C650GT
    MOA 44606

  6. #6
    Benchwrenching PGlaves's Avatar
    Join Date
    Oct 2003
    Location
    "Big Bend" TX
    Posts
    8,729
    In my shop at our previous house (in Kansas) I had a stout beam affixed directly above the lift. I could put the bike and lift up, attach the straps, lower the lift, and leave the bike hanging from the ceiling. Didn't do it often, but ...

    Our bikes (even the K75s that came with one) do not have belly pans so my shop scissors jack under the front engine hard parts is what I always do when applicable, but ....

    That hanging trick sure was slick the few times I needed to do it.
    Paul Glaves - "Big Bend", Texas U.S.A
    "The greatest challenge to any thinker is stating the problem in a way that will allow a solution." - Bertrand Russell
    http://www.bigbend.net/users/glaves

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •