Results 1 to 3 of 3

Thread: R1200RT Seat Problems

  1. #1
    Registered User
    Join Date
    Jan 2008
    Posts
    2

    Driver seat flex

    Also a big guy. The same problem, and with a two different stock pans. Figured it was seat flex. So using masking tape, release agent and Mighty putty I made some stoppers to fit in the lower seat "bucket" The problem has been fixed for the last 40k. I am setting up now to do some other molding and I could mold it as well if anyone would like to have it. I know BMW should fix the problem but I doubt they will.
    richarddegeer@yahoo.ca

  2. #2
    Registered User
    Join Date
    May 2006
    Location
    Northern New Jersey
    Posts
    636
    Quote Originally Posted by 1analguy View Post
    Well, you pretty much failed...
    That just ain't right.

  3. #3
    Is that a gimmie?
    Join Date
    Nov 2011
    Location
    Rockford, IL
    Posts
    11
    I had/have the same problem with 2 different Sargent seats on two different 1200 RTs. The way I fixed it the first time was duct tape a old BMW anonymous book to the front of the seat.

    On my current RT my fix is to put my tools under the seat. I use a flat tool bag placed like so.

    Last edited by 3Putt; 09-07-2012 at 11:40 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •