Results 1 to 9 of 9

Thread: 12v Tire Pump Suggestions

  1. #1
    Registered User 110121's Avatar
    Join Date
    Mar 2004
    Location
    San Francisco Bay Area
    Posts
    11

    Question 12v Tire Pump Suggestions

    Does anyone have a suggestion (experience) with SMALL design 12volt tire pump? I am looking for a compact and efficient pump for those roadside flat tire issues. I need the 12v connector to be compatible with the BMW accessory socket.
    South San Francisco Bay Area
    2004 R1150GS
    2003 Harley Davidson FLHRCI (Road King Classic)
    2002 F650GS

  2. #2
    RIDERR1150GSADV
    Guest
    I bought a pump at Discount Auto for $15,= . I mounted a BMW plug on the powercord and shortened that cord a bit too.
    Works fine,has a pressuregauge and is quite small. I am sure Walmart has 'm too.

  3. #3
    Registered User CGARR's Avatar
    Join Date
    Dec 2003
    Location
    Alaska
    Posts
    57
    I'll second that, pretty much any auto parts store, walmart or the like carry small 12V air pumps. I pulled all the plastic off mine to reduce the bulk, and I use an adapter pigtail to connect to the BMW style plug, but I have seen them with just a set of aligator clamps for hooking directly to the battery terminals.

    Without the plastic housing, I suppose it is no longer OSHA approved. Just have to watch the fingers around the open reduction gears, and they do get hot, but it is for emergency use only so it shouldn't see a lot of use anyhow.
    '04 R1150 GSP

  4. #4
    Miserable Mark MarkF's Avatar
    Join Date
    Mar 2003
    Location
    Connecticut
    Posts
    1,827

    Good question!

    Seen some at the local auto parts for $15, then one sold by some of the Calif. BMW dealers for $20-$30. And finally that one that's advertised in BMW ON and Rider Mag $80-$90! What's the deal?

    MarkF
    MarkF

  5. #5
    RIDERR1150GSADV
    Guest
    I wouldn't spent $80-90 on a small airpump no matter who built it or what the 'experts' say.
    The $15,= job does fine and after a year in the trunk still works.
    I left the plastic housing on my pump as the size did not change that much, but the plastic keeps your mits from burning.

  6. #6
    Registered User R100RS's Avatar
    Join Date
    Jul 2003
    Location
    North Florida
    Posts
    435
    I bought a $10 Campbell Hausfield 12V at Wally World (with NO pressure gauge). I stripped all of the plastic off and cut the cord down a bit. I kept the air hose (some people shorten that too) to make sure everything would stay leak free. I carry it in a ziploc bag under the seat. You could put a BMW plug on it (or battery clamps, or whatever you want) very easily.
    -Mike

    '02 R1150R
    '88 R100RS

  7. #7
    Registered User paulsibek's Avatar
    Join Date
    Apr 2004
    Location
    near Los Angeles
    Posts
    388

    Pump "warning"

    I bought a Camble-Hausfield (sp?), supposedly a good one.

    It works fine but I tested the gauge against two 2 tire pressure gauges, both new slider types.

    The 12v was off enough that I don't use the gauge.

    Test yours too!!!!!!!!!!!!!!

  8. #8
    Slowpoke & Proud of It! BRADFORDBENN's Avatar
    Join Date
    Mar 2003
    Location
    State of Confusion
    Posts
    7,799
    I have used the Wally World $9 special succesfully. Only modification I did was taking the plastic case off. I wrapped it in a shop towel as i figure I am going to want to wipe off my hands afterwards.
    -=Brad

    It isn't what you ride, it is if you ride

  9. #9
    RIDERR1150GSADV
    Guest

    Talking

    I only use the gauge as a general pressure indicator. I have one of those nice digital gauges that I check my tires with.
    You have to be acurate checking those rubbers you know.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •